Bosch GAS20-17A Instrucciones De Funcionamiento página 15

2610051564_GAS20-17A 5/8/18 1:18 PM Page 15
A. Engage both caster brakes 11 to
prevent unit from moving. Unlock
both latches 4 and remove the
control unit 1 (Fig 1.).
B. Make sure that both release tabs
17 are pushed all the way in (Fig.
6).
C. Push the canister lock 10 down to
either side (Fig .7).
D. Hold the unit by the push handle
13 with one hand and tilt the
canister 2 by pulling up the
canister handle 9 with the other
hand.
E. Once canister 2 is emptied, return
it to upright position.
F. Return the canister lock 10 to
locked (vertical) position.
G. Allow canister to air dry and then
replace the control unit 1 and lock
latches 4.
H. Release caster brakes 21.
Note: The canister 2 can be
completely removed from the frame
while the control unit 1 is still
removed. Simply pull out both release
tabs 17 and lift the canister 2 up.
When not in use, secure the hose 26
with hose holders 8 on top of the unit
(Fig. 9).
The attachment holder 16 on the back
of the unit is designed to hold the
drain hose 18 and other attachments
like extension tubes or nozzles
(available separately).
The recess 19 is designed to hold the
floor nozzle (available separately).
Engage the caster brakes 11 to
prevent the unit from accidental
rolling (Fig. 1).
Operating Instructions
Fig. 8
Storage
26
15
2
When replacing the canister, align the
cutouts on the holder 16 with the
pivot bar 30 (Fig 8).
Push the release tabs 17 back into
locked position and make sure the
canister is secured to the frame.
Return the canister lock 10 to locked
(vertical) position (Fig. 7).
Fig. 9
8 8
16
17
30
16
18
19