Thermal Fuses; Anti-Tipping - Vermeiren Mercurius 4 LTD Manual De Instrucciones

EN
NL
3.8

Thermal fuses

engine brake on, it could result in overload. The maximum values not to exceed are indicated in
§6.
To be able to use the scooter again, remove the overload and wait until the motor has cooled
down. Then gently press the thermal safety mechanism back in. Your scooter is now ready for
use again.
3.9

Anti-tipping

To protect the motor against overload, your scooter
has a thermal safety mechanism on the rear. The
thermal fuse will automatically cut off the motor to
prevent overheating and thus rapid wear and tear
or breakdowns. You can access the thermal safety
device through a gap in the back of the synthetic
cover.
The thermal safety device can be activated if you
go up or down slopes that exceed the maximum
specified gradient. Nominal loads that exceed the
permitted maximum could also cause the device to
jump out. Likewise, if you keep on driving with the
An anti-tipping (1) is fixed to the frame of the scooter
on the rear side. It is not possible to remove these.
The anti-tipping is there for your safety. It prevents
the scooter from tipping over backward when you
drive over small obstacles that do NOT exceed the
maximum height as specified in §6.
1
16
Mercurius 4 LTD
2020-10
Using your scooter