Rear Panel - ARP ODYSSEY Manual De Usuario

Rear panel

b c d e
a
a . Cable hook
Wrap the AC adapter cable around this hook to prevent the AC adapter from
being accidentally disconnected.
b . DC 9V jack
Connect the included AC adapter here.
First connect the AC adapter to this instrument, and then connect the plug to an
AC outlet.
c . Power switch
This turns the power on/off. To turn the power off, press and hold the switch.
d . MIDI IN connector
You can connect an external MIDI device to this connector to receive MIDI data.
e . USB B port
You can connect a computer to this port to transmit and receive MIDI data.
f . PEDAL jack
Connect an optional (separately sold) volume pedal here.
You'll also use this jack when connecting the SQ‐1 (sequencer) to control the
ODYSSEY.
g . PORTAMENTO FOOTSWITCH jack
Connect an optional (separately sold) pedal switch here.
h . OUTPUT LOW jack
Connect an amp or powered monitor speaker here.
i . OUTPUT HIGH jack
Here you can connect a mixer or amp that is equipped with an XLR jack.
f g h i j k l m n o
j . EXT AUDIO INPUT jack
If you're using the ODYSSEY as an effect processor, use a monaural phone cable
to connect your external audio source to this jack.
An external signal that is input to the EXT AUDIO INPUT jack is input to the
AUDIO MIXER and passes through the VCF and VCA. Use the connected
external device to adjust the volume.
If you use the included phone jack cable
Tip:
to connect the EXT AUDIO INPUT jack to
the headphone jack, self‐feedback can be
applied, expanding the range of sounds.
Use the headphone volume to adjust the
amount of feedback.
k . Headphone volume
Adjusts the volume of the connected headphones.
If self‐feedback is being applied, this adjusts the amount of feedback.
l . Headphones jack
Connect your headphones here.
This provides the same signal as the output from the OUTPUT LOW jack or
OUTPUT HIGH jack. If you want to apply self‐feedback, connect this jack to the
EXT AUDIO INPUT jack of the ODYSSEY.
m . TRIG IN/OUT jacks
These jacks input and output a trigger (a
signal that the keyboard is being pressed).
If you use the included mini‐phone
Tip:
cable to connect the TRIG IN jack and
the GATE OUT jack, the ADSR EG will
not be retriggered, allowing you to
play legato.
n . GATE IN/OUT jacks
These jacks input and output a gate signal (a signal that sound is being produced).
o . CV IN/OUT jacks
These jacks input and output a control voltage (a voltage that indicates the pitch).
- 13 -
Phone cable
(Included)
Mini-phone cable (Included)