Functional Test; Cleaning And Care - Ottobock 4P862 Instrucciones De Uso

• 1 pc. 4P862 guard for C-Leg
Accessories
The following components are not included in the scope of delivery and may be ordered separ­
ately:
• 1 pc. 4P863=* shield insert
6 Use
1) Open the closures on the guard.
2) Spread open the guard.
3) Put the guard over the knee joint from the front (see fig. 1).
4) Press the guard together with both hands (see fig. 2).
INFORMATION: The retainers (detail, see fig. 2) of the guard have to engage on the
frame element of the knee joint.
5) Fasten the two closures (see fig. 3).
If the optional shield insert is used, the following steps must be completed in addition:
► Slide the shield insert into the recess of the guard from the front and let it engage (see fig. 4).
NOTICE
Loss of stability due to inadequately installed retainers
No hold of the guard on the knee joint.
► Ensure that all retainers and closures are properly engaged and/or fastened.

6.1 Functional Test

INFORMATION
All of the points described in this section must be completed exclusively by qualified personnel.
After assembly, the following points have to be checked:
• Is the distance between the socket and guard at least 5 mm?
• Is the function of the rotation adapter impaired?
Material may be removed from the guard to improve the functionality.
INFORMATION: If material is removed, the stability/flexibility of the guard on the knee
joint may be impaired.
7 Maintenance
► During the standard inspection of the prosthesis components, also inspect the product.

7.1 Cleaning and Care

NOTICE
Improper product care
Damage to the product due to the use of incorrect cleaning agents.
► Only clean the product with a damp cloth and mild soap (e.g. 453H10=1 Ottobock Der­
maClean).
1) Clean the product with a damp, soft cloth.
2) Dry the product with a soft cloth.
3) Allow to air dry in order to remove residual moisture.
Ottobock | 9