Safety Instructions; Description; Component Names; Monitor - Avidsen 756+MU2 Instrucciones De Uso

1. SAFETY INSTRUCTIONS

Important!
• Please carefully read the user manual before installing or using this product.
• If you are installing this product for someone else, remember to leave the manual or a copy of it with the end
user.
Warning:
• The various items should only be disassembled by an authorised technician.
Safety measures:
• For operation of this system in complete safety, it is essential that the installers, users, and technicians follow all of
the safety procedures described in this manual.
• Specific warnings and warning symbols are given for items if necessary.

2. DESCRIPTION

1 •

Monitor

2 • Wall bracket
3 • Adapter plug
General
This video intercom is composed of an interior response station with a screen and an exterior panel with an
intercom and camera, allowing the person inside to see and communicate with the visitor outside who rings the
doorbell. The system is easy to install, with only two wires needed for all functions: the doorbell, the video feed,
the intercom, and the strike plate and automated opening controls. For effective usage, please carefully read this
instruction manual.

3. COMPONENT NAMES

a. Monitor
(fig. 2)
1. 7" (18 cm) colour screen.
2. Surveillance or image display button.
3. Communication with the exterior panel after a call.
4. Button for an electric strike plate or lock (12V output
5. Button for an automated gate (dry contact on the back of the camera).
6. Doorbell volume setting.
7. Brightness setting. 8. Colour setting.
9. Ringtone selection.
10. Microphone to communicate with the exterior panel.
11. On the back of the monitor, a socket for the 17V
ment in compliance with standards in force: NFC 15-100 for France).
12. Input for the wires to connect to the exterior panel.
b. Exterior panel, exterior camera
1. Microphone: allows the visitor to communicate with the person inside.
2. IR LED: enables visibility in the dark (light not visible to the naked eye).
3. CMOS camera lens.
4. Call button: when a person presses this button, the name label lights up and the doorbell rings inside. The
screen and the camera turn on.
5. Speaker: allows the person inside to be heard outside.
6. Input for the wires to connect to the monitor.
7. Name label. To change the label in the holder, carefully lift the plastic protector (7) with a small screwdriver and
slide out the label in the holder. The name label lights up in the dark.
(fig. 1)
4 • Exterior panel
5 • Weather-proof shield
adapter plug (adapter to be connected with installed equip-
(fig. 3)
642277 - V1
on the back of the camera).
GB2