kiwy SLF 23 Manual De Instrucciones página 14

Car interiors can become very hot when left in direct sunlight.
It is therefore recommended that the child car seat, when not in use, is
covered by for example a towel.
This prevents components, particularly those attached to the child car
seat becoming hot and burning the child.
Things not to do:
Never use the child car seat without fastening the safety belts , as
described in these fitting instructions.
VERY IMPORTANT: Never install the child car seat by the Isofix con-
nectors only. They ALWAYS must be used in combination with the
car seat safety belts.
Never place any padding between the base of the child car seat and the
vehicles seat as it could impair the safety of the child car seat.
Do not add or modify this product in any way.
Never use spare parts that are not recommended or supplied by the
manufacturer.
Do not leave a child in the child car seat unattended at any time.
Do not allow children to play with the child car seat.
This child car seat must not be used without its fabric cover.
The seat cover should not be replaced with any other than the one re-
commended by the manufacturer, because the cover constitutes an in-
tegral part of the restraint.
Do not allow your child car seat to come into contact with corrosive
substances e.g. battery acid.
Never use this seat if it has been in an accident, or it has badly worn out.
In the event of an emergency
In case of an emergency your child can be released quickly by pressing
the red button on the buckle of the car safety belt.
If your child car seat has been involved in an accident, you MUST dispose
of it and purchase a new one.
Even if your child car seat shows no signs of damage, there may be
weakness that you are unable to see.
4