Cleaning The Coffee-Making Unit - Fagor Xperta Instrucciones De Uso

GB
If a foreign body is impossible to
remove, take off the grinding ring.
To do this, proceed as follows (Fig. 21):
1. Push the Release catch for removing
grinding ring (Fig. 2, U) forward toward
the centre of the grinder.
2. Keep it in this position and turn the
Lever for setting grinding texture (Fig.
2, V) approximately one full turn
clockwise until it comes up against the
stop.
You can continue to turn the Lever for
setting grinding texture (Fig. 2, V) only
if the Release catch for removing
grinding ring (Fig. 2, U) is pressed.
Now release the grinding ring (Fig. 22)
and remove the foreign body or bodies.
Caution! Risk of injury from the spin-
ning grinder. Never switch the coffee
machine on, when you are working on
the grinder. This can lead to severe
injuries. Before starting work, ensure
that the machine is unplugged from
the mains socket.
When refitting the grinding ring,
ensure that both catches on the grind-
ing ring holder engage in the corre-
sponding slots (Fig. 22).
Failure to do this can lead to damage
to the grinder.
Turn the Lever for setting grinding tex-
ture (Fig. 2, V) approximately one full
turn anticlockwise until it comes up
against the stop.
Set the bean container in place at the
„UnlockContainer" position
turn it back to the „Coffee Beans" posi-
tion .
Add a small quantity of coffee beans,
and test the proper operation of the
grinder by making a cup of coffee. The
first time the grinder is used, or after
cleaning, less ground coffee will enter
the coffee-making unit, because the
channel first has to be filled. This can
influence the first cup of coffee.

13.5 Cleaning the Coffee-making Unit

We recommend cleaning the brewing
unit monthly. More frequent cleaning
is recommended if the machine is
used more intensively. If your
appliance is left unused for longer
periods (e.g. holidays), it is necessary
to empty the coffee grounds contai-
ner and the water reservoir.
Before reconnecting clean the
brewing unit thoroughly.
Removing the brewing unit:
Switch off the appliance with button h
"ON/OFF". The appliance carries out a
rinsing process and asks you subse-
quently to empty the coffee grounds
container.
Pull the coffee grounds container out
1.
of the appliance, empty and clean it.
Fig. 23
Press the unlocking button on the
2.
service door. Fig. 24
3.
The service door opens to the front.
Fig. 25
4. The brewing unit is located behind
the service door. Fig. 26
Caution! Risk of burning through
hot brewing unit! If you have just
dispensed coffee, then the dispen-
ser could still be hot!
5/6 Remove the brewing unit by
inserting your index finger through
the ring of the coffee dispenser at the
front of the brewing unit and pull the
brewing unit straight forwards.
Prevent the brewing unit with the
and
other hand from falling. Fig. 27, 28.
1.
Cleaning the brewing unit /
inserting the brewing unit
The brewing unit is open and the
ejection lever folds down. Turn the
brewing unit around. Both stainless
steel sieves are easily accessible now.
Fig. 29.