EHEIM skimmarine300 Manual De Instrucciones página 17

English
6. Maintenance
Attention! Electrocution!
Before all maintenance work, remove the mains plug.
Caution! Material damage.
Do not use hard objects or aggressive cleaning agents for cleaning.
The following sections describe maintenance work necessary for optimum and fault-free operation. Regular mainte-
nance prolongs the service life and assures functionality of the appliance over a long period.
Weekly maintenance work
1. Empty the foam cup once or twice a week, as required.
2. Check the appliance for algae growth and dirt accumulation.
In the event of algae growth and dirt accumulation, proceed as follows:
1. Remove the mains plug of the pump.
2. Hold the skimmer with one hand.
3. With the other hand, move the magnet halves with logo on the glass panel away from the skimmer.
4. Remove the skimmer.
5.
brush.
Monthly maintenance work
Depending on the degree of contamination, we recommend that you completely disassemble and clean the appliance once
every month. To do so, proceed as follows:
Disassembling and cleaning the appliance
1. Before maintenance work, remove the mains plug of the pump.
2. Hold the skimmer with one hand.
3. With the other hand, move the magnet halves with logo on the glass panel away from the skimmer.
4. Remove the skimmer.
5. Remove the foam cup
6.
7. Pull the side parts of the cover
8. Pull the silicone tube
9. Remove the cover from the opening in the housing.
10. Pull the pump
11. Using a brush, clean all components under a jet of water.
1. Press both side latches of the pump cover inwards and pull the pump cover
2. Pull the impeller
3. Pull the axle
4. Using a brush, clean all components under a jet of water.
from the housing
gently outward and tilt the cover forward (
away from the angle joint
out of the housing from above ( ).
, together with the axle grommets,
out of the impeller.
( ).
out of the housing from below (
.
out of the pump housing.
17
).
).
ab.