Periodic Maintenance - Berner BS 200 Manual De Usuario

9
Instructions for use
Before starting to set you system up, read
carefully the user manual of the core drill motor
and of all the other parts of the system (pump,
anchors...).
Proceed as follows:
if available for your rig, mount the F system by
▪
screwing it on. Make sure it is securely
tightened;
▪ fasten the stand on the surface, as described
in the previous
paragraph;
Warning: always ensure that the fastening
mode is suitable for the application and that the
stand is securely fastened;
▪ if needed, tilt the column as shown in the
paragraph Tilting the column;
mount the feed handle (E) according to the
▪
paragraph Feed handle;
mount the core drill motor according to the
▪
instructions of the Core drill motor mounting
paragraph. See Maximum drilling diameter
and core drill motor limitations for limitations;
refer to the user manual provided by the core
▪
drill motor manufacturer for further instructions
and limitations;
▪
Warning: before proceeding ensure that all
bolts and screw are securely tightened.
mount the core bit to the drill motor;
▪
▪ switch the motor on, applying light pressure
drill about 1 cm deep into the workpiece. This
allows core bit centring preventing core bit
side shifting;
after this, apply sufficient pressure to achieve
▪
smooth progressive drilling.
Maintenance - Service - Warranty

Periodic maintenance

▪ keep your drill stand clean and dry, in particular
its base and rack;
never use solvents or other harsh chemicals for
▪
cleaning your core drill;
▪ after use put your stand in a dry, safe and
inaccessible to children place;
do not use the stand with damaged components
▪
or with malfunctions. In these cases, ask a
BERNER authorized
replacement.
Service
any repairing operation must be carried out by
▪
BERNER authorized service personnel only.
Ask your dealer for the list of the BERNER
authorized service centres;
use original BERNER spare parts only.
▪
Warranty
Your product is under BERNER warranty for 36 months,
starting from the date of purchase. This warranty is against
faulty workmanship, flaws material and design problems.
The warranty covers free components replacement,
manpower needed for replacement and wearing materials if
07-2020
Drill Stand Fastening
service centre for
English
intact before the repairing operation. The warranty doesn't
cover the replacement of:
components of the product replaced or modified
▪
by people not authorized by BERNER;
components damaged by carelessness, not
▪
suitable use or overloaded;
▪ components of products from which safety
devices have been removed;
worn wearing parts replaced.
▪
This warranty does not apply to products that have been
damaged by carelessness like lack of periodic cleaning and
maintenance, damage to the rack etc.
The life of wearing parts is variable depending on the
working time and the kind of work they are used for.
Examples of wearing parts are: ball and roller bearing not in
oil, rubber seal etc.
If during repair under warranty, a wearing part is worn and
this can affect the safety and the operation of your product,
the customer is asked to pay for the replacement of these
components not under warranty. If the customer refuses
this, no repairing operation will be carried out.
The warranty covers free replacement of components
which are defective due to wrong manufacturing or
assembly, if the product is brought to an authorized service
centre and if:
▪ the product is together with a purchasing
document stating when the product has been
purchased. Valid purchasing documents are
invoices or delivery certificates;
cleaning and maintenance has been carried out
▪
regularly;
no unauthorized people have serviced the
▪
product;
the product has not been misused and it has
▪
been used accordingly with the directions given
in this user manual;
all safety directions have been followed.
▪
Your BERNER product is not under warranty if:
the product has been serviced by people not
▪
authorized.
▪ damage is due to incorrect
carelessness. Dents due to drops or strokes will
be considered evidence of carelessness;
damage has been caused by overload;
▪
When your product is under warranty, in some cases, like if
the BERNER authorized service personnel think the
repairing is too expensive to be carried out, the free
substitution of the product is possible. In addition, the
substitution under warranty is provided after two fruitless
reparation attempts and after the authorization of a
BERNER service manager. In case of substitution, the
customer is, usually, requested to pay for the worn wearing
parts of the product that has been replaced.
User-replaceable components
No components of the BERNER product can be replaced
by the user. Replacement must be carried out by BERNER
authorized personnel only.
BERNER service centres - Address list
Ask your dealer for a BERNER service centres address list.
use and/or