Makita DCO140 Manual De Instrucciones página 8

2
► 1. Projections 2. Shoe
Align the projections in the circular guide with the
grooves in the shoe, and secure the shoe and circular
guide with the thumb screw.
4
2
3
► 1. Thumb screw 2. Circular guide 3. Shoe 4. Loosen
5. Tighten
To adjust the cutting depth, loose the thumb screw and
then slide the shoe with the circular guide. After the
proper adjustment, tighten the thumb screw securely.
Using circular guide
3
2
► 1. Knob 2. Tighten 3. Loosen
Loosen the knob, and adjust its position in accordance
with the size of the circle to be cut. (The hole dimen-
sions to be cut are indicated on the side of the circular
guide as a general guideline.) After completion of the
adjustment, tighten the knob securely.
1
1
5
1
► 1. Knob
Install the end of the knob into the center of the circle to
be cut, and proceed to cut in a clockwise direction.
Vacuum cover (optional accessory)
To perform cleaner operations, use the vacuum cover
and connect the tool to Makita vacuum cleaner or dust
collector.
2
► 1. Thumb screw 2. Vacuum cover
Loosen the thumb screw and remove the shoe. Attach the
vacuum cover, and fasten it securely with the thumb screw.
The circular guide (optional accessory) can be installed
on the vacuum cover.
2
► 1. Tool 2. Vacuum cover 3. Hose 28 4. Hose for
vacuum cleaner 5. Vacuum cleaner
Connect the hose of a vacuum cleaner/dust collector to
the vacuum cover. When connecting to Makita vacuum
cleaner, use an optional hose 28 mm (1-1/8") in inner
diameter.
8 ENGLISH
1
1
5
1
3
4