Forwards/Reverse Rotation; Care And Maintenance; Accessories; Manufacturer's Warranty - Tools - Hilti TE 2 Manual De Instrucciones

is integrated in the side handle, which can be pivoted
and locked in position. Release the side handle (turn
counter-clockwise), set the depth gauge to the desired
drilling depth and tighten the side handle (turn clock-
wise) .
Forwards / reverse rotation
For screwdriving, the desired direction of rotation can
be selected simply by moving the switch
For forwards rotation, select position ( ) and for rever-
se rotation, select position ( ).
When the tool is operated in reverse rotation, the func-
tion selection switch should be engaged in the posi-
tion for drilling without hammering action ( / 1st gear).
For drilling, always ensure that forwards rotation
( ) is selected.

Care and maintenance

Unplug the supply cord.
Care of insert tools
Remove any dirt adhering to the surface of the insert
tools and protect them from corrosion by rubbing them
with an oily cloth from time to time.
Care of the tool
CAUTION
Keep the power tool, especially its grip surfaces, clean
and free from oil and grease. Do not use cleaning agents
which contain silicone.
The outer casing of the power tool is made from impact-
resistant plastic. Sections of the grip are made from a
synthetic rubber material.
Never operate the power tool when the ventilation slots
are blocked. Clean the ventilation slots carefully using a
dry brush. Do not permit foreign objects to enter the inte-
rior of the power tool. Clean the outside of the power tool
at regular intervals with a slightly damp cloth. Do not use
a spray, steam pressure cleaning equipment or running
water for cleaning. This may negatively affect the elec-
trical safety of the power tool.
Maintenance
Check all external parts of the tool for damage at regular
intervals and check that all controls operate faultlessly.
Do not operate the tool when parts are damaged or when
the controls do not operate faultlessly. If necessary, have
the tool repaired at a Hilti service centre.
Electrical parts of the tool may be repaired only by trained
electrical specialists.
Checking the tool after care and maintenance
After all care and maintenance work, the tool must be
checked to ensure that all safety equipment is fitted and
that it operates faultlessly.
Printed: 07.07.2013 | Doc-Nr: PUB / 5070816 / 000 / 00
Information for possible Serviceadresses can be
obtained at our Headquarter for North America.
Hilti Inc.
5400 South 122
US - Tulsa, OK 74146
U. S. A.
Tel. +1-800-879-8000
.

Accessories

Use only insert tools with TE-C connection end or straight
shank bits with quick release chuck or adaptor
Hilti power tools have been designed to work opti-
mally as a system together with Hilti insert tools.
Accordingly, highest performance and longest life
expectancy can be achieved when you use this pow-
er tool with Hilti insert tools. A comprehensive pro-
gram of insert tools and accessories is available for the
TE-C system
be found in the current Hilti product catalogue.
Should you require insert tools not included in the stan-
dard programme, please contact the Hilti customer ser-
vice department or your Hilti sales representative. Hilti
offers a comprehensive range of special insert tools in
professional quality.
Check your insert tools at regular intervals and replace
them in good time. A damaged or badly worn connec-
tion end may result in damage to the power tool. Drill
bits with chipped or broken carbide tips may no longer
drill holes of the specified diameter, thus influencing
their suitability for anchor fastenings.
Please observe the instructions on care and mainte-
nance of your insert tools given in the following section.
Dust removal (TE DRS-S)
A DRS extraction head can be attached to the side han-
dle / depth gauge. An industrial vacuum cleaner is used
to remove drilling dust and fragments.
Manufacturer's warranty – tools
Hilti warrants that the tool supplied is free of defects in
material and workmanship. This warranty is valid so
long as the tool is operated and handled correctly, cleaned
and serviced properly and in accordance with the Hilti
Operating Instructions, and the technical system is main-
tained. This means that only original Hilti consumables,
components and spare parts may be used in the tool.
nd East Ave.
. Details of the entire programme can
en
.
7