SERVICE AND MAINTENANCE PLAN
You can perform the
inspections marked with
•
yourself if you have
technical skills, a little
experience and suitable
tools e.g. a torque wrench.
If faults are detected
during inspections, take
appropriate measures
immediately. Your speci-
alist dealer will be happy
to help if you have any
questions or if anything is
unclear.
Work marked with
✖
should only be carried out
by the specialist dealer as
part of an annual service.
NOTE!
Only use original
or equivalent parts
when replacing
wear parts and
safety-related parts.
EN-48
COMPONENT
Lighting
Tires
Brakes
Brake cable housings
Suspension element
Suspension fork
Rims
Rear swing arm
Chain (derailleur gear)
Chain (hub gear)
Crank
Paint
Wheels
Handlebars / stem
Handle grips with screw clamping Check tightness
Headset
Metal surfaces
Hubs
Pedals
Belt drive
Saddle clamp
Seatpost
Rear derailleur
Disc brakes
Quick release skewers
Screws and nuts
Mudguard attachment
Valves
Gear cables
ACTION
Check function and attachment
Check air pressure
Check tread height and side walls
Check lever stroke and position to the rim
Check pad thickness
Visual check for tightness
Maintenance (see from page 28), functional test
Check for play and tightness, functional test
Check wall thickness/wear indicator, replace if necessary
Check function and bearing play
Check and lubricate if required
Check wear and replace if necessary
Check and lubricate if required
Check wear and replace if necessary
Check and re-tighten if required
Check wear on chainwheel
Preserve
True running and spoke tension
Axle nuts/quick-release skewer
Visual check
Replace
Check bearing play
Re-lubricate
Preserve (Except rims, brake discs)
Check bearing play, lubricate
Check bearing play, lubricate
Check for wear; change if necessary
Check tightness
Clean seat tube, lubricate
Clean, lubricate
Screw connection brake discs and calipers
Check tightness
Check and retighten if required
Check tightness
Remove and lubricate or replace