Luggage And Child Transport - RIESE & MUELLER Charger Manual De Instrucciones

LUGGAGE AND CHILD TRANSPORT

CARRIER WITH SNAP-IN SYSTEM
Many Riese & Müller models can be fitted
with the racktime Snapit system (see www.
racktime.com) or the MIK system (see www.
mik-click.com). This facilitates the attachment
of baskets. Please observe the maximum
permitted load (see page 45).
TRANSPORTING CHILDREN AND LOADS
Before setting off with a loaded E-Bike or
child seat, check the following:
• Has the basket or child seat been fixed
correctly?
• Is the child wearing a seatbelt or has the
load been sufficiently secured to prevent it
from slipping or falling out?
• Did you make sure that the permitted over-
all weight has not been exceeded?
• Is the child wearing a helmet?
• Did you ensure that nothing can get into
the spokes?
• Is the tire pressure high enough?
• Is the weight of the load distributed evenly?
• Did you make sure that lighting or reflectors
aren't covered up?
ATTENTION!
Riding behaviour is altered by a full
load and the braking distance is
longer. Carefully familiarise yourself
with the different riding behaviour of
the fully-loaded bike.
EN-32
DANGER!
Do not ride if one of the points
specified does not apply. If fixed
insufficiently, the basket and/or
child seat can come loose and
cause serious accidents.
DANGER!
Child seats must not be attached
to the seatpost. Make sure that
the child is unable to touch the
springs and movable parts on
saddle and seatpost with its fin-
gers as this would pose a great
risk of injury! Only use a tested
and safe child seat. Prevent the
child's feet from touching any
moving parts such as the spokes.
When the E-Bike is parked using
the stand, the child must not
remain in the child seat.