Winter Storage - RIESE & MUELLER Charger Manual De Instrucciones

MAINTAINING ANODISED SURFACES
The aluminium parts of your Riese & Müller
E-Bike are protected by a special anodisa-
tion. This layer is particularly hard and thus
relatively scratch-resistant. Despite these
positive characteristics the anodic coating
requires care.
DANGER!
Do not use any care products
or chain lube on brake pads,
brake discs and the rims' brake
surfaces. Otherwise the brakes
could fail causing accidents and
serious injuries.
E-BIKE STORAGE
It is recommended to keep your E-Bike in
a dry, shady and well-ventilated space.

WINTER STORAGE

• During a long period of storage, the tubes
gradually lose pressure, which can damage
the tires. For this reason it is advisable to
hang your E-Bike up for storage and
regularly check the tire pressure.
• Clean the bike and protect it against
corrosion.
• Store the bike in a dry space.
• Before storing your bike for the winter,
charge the battery to approx. 60 % and
recharge it to 60 % every three months.
EN-39