Scope Of Delivery; Mains Connection; Connection Of Peripheral Devices; Initial Commissioning - KERN and SOHN ALT Manual De Instrucciones

7.2.2 Scope of delivery

Serial accessories:
• Balance
• Weighing plate
• Mains power supply
• Operating Manual
• Glass wind screen (excl. Modell PLT 2500-2M, PLT 4500-2M)

7.3 Mains connection

Power is supplied via the external mains power supply. The stated voltage value
must be the same as the local voltage.
Only use original KERN mains power supplies. Using other makes requires consent
by KERN.

7.4 Connection of peripheral devices

Before connecting or disconnecting of additional devices (printer, PC) to the data in-
terface, always disconnect the balance from the power supply.
With your balance, only use accessories and peripheral devices by KERN, as they
are ideally tuned to your balance.

7.5 Initial Commissioning

In order to obtain exact results with the electronic balances, your balance must have
reached the operating temperature (see warming up time chap. 1). During this warm-
ing up time, the balance must be connected to the power supply (mains, accumulator
or battery).
The accuracy of the balance depends on the local acceleration of the fall.
Please be sure to observe the information in the chapter on adjusting.
20 ALTPLT-BA-e-0721