Tabla de contenido
Idiomas disponibles
Idiomas disponibles
CLEANING: HUT-220 Series (continued)
Disinfecting directions: Disinfect following scale removal
STEP 1
DO NOT DISINFECT
demineralization
cartridge.
STEP 4
Soak water pump
components, mist nozzle
and clear protective
cover in water reservoir
of the main housing if
these parts were not
cleaned on the top rack
of dishwasher.
Note: For best cleaning results hose should be soaked in the base and then rinsed with clean,
cool water until the smell of bleach is gone.
8
STEP 2
Set aside top housing,
clear protective cover,
water pump and water
hose.
STEP 5
Wipe top cover with remaining
water bleach solution if these
parts were not placed in
dishwasher. Place hose in bleach
solution. Soak for 15-20 minutes.
Thoroughly rinse base and any
parts not placed in dishwasher
until the smell of bleach is gone.
STEP 3
Add 1 TB of bleach to 1
gallon water. Add ½ to
¾ gallon of water/bleach
solution to water reservoir
of the main housing.
NOTE: USING MORE
THAN 1 TB OF BLEACH
PER GALLON OF
WATER WILL RESULT
IN DAMAGE TO YOUR
HUMIDIFIER.
Tabla de contenido
