KitchenAid 720-0709C Instrucciones De Instalación Y Manual De Uso Y Cuidado página 23

Your Searing Side Burner
Using
Infrared grilling produces intense heat which quickly sears the
meat.
Using Your Searing Side Burner
Infrared grilling produces intense heat which quickly sears the
meat. Searing locks in flavor and juices while allowing the outer
surface to absorb smoke and food aroma that is produced as surface to absorb smoke and food aroma that is produced as
grease and drippings are vaporized by the burner. The result is a
crisp, flavorful outside with a tender, juicy inside.
1. Preheat the infrared sear burner for 5 minutes.
2. Ensure that meats are fully thawed and that all excess fat is
trimmed away prior to grilling.
3. Leave the burner set to HI when placing food on the grill to sea
4. Use the sear burner to sear meat 1 to 2 minutes on each side,
then move the meat to the main grill cooking surface to
finish grilling to the desired doneness.
IMPORTANT: It is recommended that the sear side burner lid be
raised when the burner is in use to eliminate the possibility of
increased lid and handle temperatures. increased lid and handle temperatures.
1. To close the searing side burner lid, first lift up the lid to release
the lock then lower it to the closed position.
1
Lighting the Searing Side Burner
1. Remove the searing side burner cover. Do not light burners 1 Remove the searing side burner cover Do not light burners
with the cover on.
2. Do not lean over the grill.
3. Push in and turn the control knob to IGNITE/ON and hold
in. You will hear the "snapping" sound of the spark. When
burner is lit, release the knob. Turn knob to desired setting.
2
IMPORTANT: If burner does not light immediately, turn the burner
knob to OFF and wait 5 minutes before relighting.
Manually Lighting the Searing Side Burner
1. Remove the searing side burner cover. Do not light
burners with the cover on.
2. Do not lean over the grill.
3. Remove the manual lighting extension (see following
illustration) and attach a match to the split ring.
4. Strike the match to light it.
5. Hold the lit match close to the searing side burner.
6. Push in and turn the burner knob to IGNITE/ON for the burner
closest to the lit match. The burner will light immediately. When
burner is lit, turn knob to desired setting.
7. Remove match and replace manual lighting extension on the
right side panel.
IMPORTANT:
If burner does not light immediately, turn the burner knob to OFF
and wait 5 minutes before relighting. If any burners do not light after
attempting to light them manually contact the Customer Service attempting to light them manually, contact the Customer Service
Center. See the "Assistance" section.
23