Consumables; Technical Data - Hilti AG 180-20 D Manual De Instrucciones

2.9 Guard with cover plate 2
DANGER
When using abrasive cutting discs to cut or slit metals, the guard with cover plate must be fitted. When using
diamond cutting discs it is recommended that the guard with cover plate is fitted.

3 Consumables

en
Discs with a diameter of max. 180 mm, designed for a speed of 8500/min and a peripheral speed of 80 m/sec,
and with a maximum thickness of 6.4 mm (abrasive grinding discs) or 2.5 mm (abrasive cutting discs).
Discs
Abrasive cutting disc
Diamond cutting disc
Abrasive grinding disc
Diamond grinding disc
Assignment of discs to the equipment used
Equipment
Guard
Guard with cover
plate
Side handle
Clamping nut
Clamping flange

4 Technical data

Right of technical changes reserved.
Power tool
Rated power input
Rated current input
Rated frequency
Rated speed
Max. washer diameter
Dimensions (L x H x W) without hood
Weight in accordance with EPTA procedure 01/2003
Information about the power tool and its applications
Thread diameter
Thread length
Protection class as per EN / IEC
NOTE
The vibration emission level given in this information sheet has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment
of exposure. The declared vibration emission level represents the main applications of the tool. However if the tool is
used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total working period. An estimation of the level of exposure to
vibration should also take into account the times when the tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety
18
Application
Cutting, slitting
Cutting, slitting
Rough grinding
Rough grinding
AC‑D AG-D
-
X
-
X
X X
X X
X X
Designation
AC‑D
DC‑D
AG‑D, AF‑D, AN‑D
DG‑CW
AF-D AN-D
X X
- -
X X
X X
X X
AG 180‑20D/ AG 180‑20P
220...240 V: 2,000 W
8...9 A
50 / 60 Hz
8,500/min
Ø 180 mm
470 mm x 106 mm x 132 mm
5.2 kg
M14
15 mm
Protection class II (double insulated)
Material
metal
mineral
metal
mineral
DG‑CW DC‑D
-
X
-
X
X X
X X
X X