Power Supply; Playing Compact Disc - Roadstar HIF-1850TUMPK Manual De Instrucciones

Ocultar thumbs Ver también para HIF-1850TUMPK:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 23

POWER SUPPLY

This unit operates from a main supply of 230V ~ 50Hz. Connect the AC power
cord to the AC household main outlet. Ensure that the voltage is as indicated on
the rating plate on the rear of the unit.
Press ON/OFF (25) to turn the unit ON. Press and hold ON/OFF (25) for 3
seconds to turn the unit OFF.
When no sound is produced, the unit will switch OFF automatically after 15
minutes.
FM/MW RADIO OPERATIONS
1. Select FM/MW mode using FUNCTION SELECTOR (14).
2. Turn TUNING KNOB (10) to select your favourite radio station.
3. Turn the VOLUME KNOB (19) to the desired volume level.
ANTENNE
For FM reception there is a built-in FM antenna wire (26) at the rear of the
unit. Move the wire around to obtain the best reception.
For AM reception the signals are picked up through a built-in ferrite antenna.
Your may have to orient the unit to obtain the best reception.
LISTENING TO TAPE
1. Select TAPE mode using FUNCTION SELECTOR (14).
2. Load a cassette tape into the unit. The system will start playback
automatically after inserting the cassette tape.
3. Press FFD/EJ (5) half inwards during playback mode. The tape will wind
forward. Slightly press FFD/EJ (5) again to resume playback.
4. Press FFD/EJ (5) completely inwards and the cassette tape will be ejected
through the CASSETTE MECHANISM (6).

PLAYING COMPACT DISC

1. Select CD mode using FUNCTION SELECTOR (14).
2. Press CD DOOR OPEN/CLOSE BUTTON (21) (1 on remote) to open the cd
door. Place a cd with the printed side facing up inside the tray, then close the
cd door. The first track will start playback.
Press SKIP -/+ (23/24) (3/9 on remote) to select your favorite tunes. If you
hold SKIP -/+ (23/24) (10/11 on remote), the playing track will go fast
backward or forward until you release the button.
Press PLAY/PAUSE (16) (2 on remote) to pause the playback. The track
number will start blinking. Press PLAY/PAUSE (16) (2 on remote) again to
resume the playback.
Press STOP (22) (4 on remote) to stop the playback.
English
2
Tabla de contenido
loading

Tabla de contenido