Additional Safety Rules - Makita SG1250 Manual De Instrucciones

ENGLISH
1 Shaft lock
2 Notch
3 Scale
4 Clamping screw
5 Switch lever
6 Hex socket head bolt
7 Cover
8 Lock nut
SPECIFICATION
Model
Wheel diameter
–1
No load speed (min )
Overall length
Net weight
Safety class
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for cutting tracks in concrete walls or
cutting in ferrous materials or concrete drainage chan-
nels with a diamond wheel but without using water.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.
Safety hints
For your own safety, please refer to the enclosed safety
instructions.

ADDITIONAL SAFETY RULES

1. Always use eye and ear protection. Other per-
sonal protective equipment such as dust mask,
gloves, helmet and apron should be worn.
2. Hold tool by insulated gripping surfaces when
performing an operation where the cutting tool
may contact hidden wiring or its own cord. Con-
tact with a "live" wire will make exposed metal
parts of the tool "live" and shock the operator.
3. Keep guards in place.
4. Use only wheels with the correct size and wheels
having a maximum operating speed at least as
high as the highest No Load Speed marked on
the tool's nameplate.
6
Explanation of general view
9 Lock nut wrench
10 Diamond wheel
11 Space ring 6 (6 mm thick)
12 Space ring 3 (3 mm thick)
13 Front handle
14 Cam
15 Dust nozzle
16 Vacuum cleaner
SG1250
125 mm
European
10,000
countries
Other
9,000
countries
346 mm
4.1 kg
/II
ENB085-1
17 Hose
18 Hex wrench
19 Base
20 Inhalation vent
21 Exhaust vent
5. Observe the instructions of the manufacturer for
correct mounting.
6. Check that the workpiece is properly supported.
7. Pay attention that the wheel continues to rotate
after the tool is switched off.
8. Ensure that the ventilation openings are kept
clear when working in dusty conditions. If it
should become necessary to clear dust, first dis-
connect the tool from the mains supply (use non
metallic objects) and avoid damaging internal
parts.
9. Watch out for flying sparks. Hold the tool so that
sparks fly away from you and other persons or
flammable materials.
10. Check the wheel carefully for cracks or damage
before operation. Replace cracked or damaged
wheel immediately.
11. Use only flanges specified for this tool.
12. Be careful not to damage the spindle, flanges
(especially the installing surface) or bolt. Dam-
age to these parts could result in wheel break-
age.
13. Hold the tool firmly.
14. Keep hands away from rotating parts.
15. Make sure the wheel is not contacting the work-
piece before the switch is turned on.
16. Wait until the wheel attains full speed before cut-
ting.
17. Stop operation immediately if you notice any-
thing abnormal.
18. Never attempt to cut with the tool held upside
down in a vise. This can lead to serious acci-
dents, because it is extremely dangerous.
19. Before setting the tool down after completing a
cut, be sure that the wheel has come to a com-
plete stop.
20. Do not stop the wheel by lateral pressure on the
disc.
21. The tool must be used only for dry cutting. Do
not use water.
SAVE THESE INSTRUCTIONS.