Tabla de contenido
9 RESET
If it becomes necessary to reset the control unit to restore the factory
settings, press the SELECT and SET keys together; this will cause all the
RED indicator LEDs to light simultaneously followed immediately by the
control unit switching off.
10 DIAGNOSTICS
Photocell Test:
The control unit is prearranged for connection of safety devices in
compliance with standard EN 12453 point 5.1.1.6. At each operating
cycle a functional test of the connected photocell is performed. In the case
of an open circuit and/or malfunctioning of the photocell, the control unit
does not enable movement of the gate and visually signals the test failed
condition by causing all the indicator LEDs to blink simultaneously. As soon
as correct operation of the photocell is restored, the control unit is ready
for normal use. This operating mode guarantees failure mode monitoring in
compliance with EN 954-1 Category 2.
Commands input test:
In correspondence with each low voltage command input, the control unit
is equipped with an indicator LED so that the status of the input can be
checked at a glance.
Operating logic: LED on input closed, LED off input open.
11 WARRANTY
Fratelli Comunello S.p.A. guarantees the proper functioning of the actuators
for 24 months from the date of manufacture, provided that the performance
specifications indicated in the product instruction manuals are complied
with. Fratelli Comunello S.p.a. guarantees exclusively, and therefore with
the exclusion of claims for compensation made by equivalence, the free
repair or replacement of defective parts that will be recognised as such,
according to the unquestionable technical judgement of the staff of Fratelli
Comunello S.p.A. The material under warranty shipped to the headquarters
of Fratelli Comunello S.p.A., must be shipped prepaid and will then be sent
back carriage forward. The material considered defective and shipped to
Fratelli Comunello S.p.A. will remain the property of the latter.
- The cost of labour required for repairs and replacements remains the
responsibility of the purchaser. No compensation is paid for the period of
inactivity of the plant.
The intervention does not extend the duration of the warranty. Under
penalty of forfeiture, the buyer must report any product defects and faults
within a term of 8 (eight) days to be calculated respectively from the date
of discovery of the defect or from the date of delivery of the goods. The
report must be made exclusively in writing. The warranty does not include:
Breakage or damage due to transportation; failure or damage caused by
faults in the electrical system present at the premises of the purchaser of
the product and/or by neglect, negligence, inadequacy, abnormal use of
the system; failure or damage due to tampering by unauthorised personnel
or consequent to incorrect use/installation (in this regard, we system
maintenance at least every six months is advised) or the use of non-original
spare parts; defects caused by chemical agents and/or atmospheric
phenomena.
The warranty does not include the cost for consumables or for alleged
defects or casual controls.
Product characteristics
Product Features Fratelli Comunello S.p.A. products are subjected
to continue changes and improvements; their technical features
and
image
may
therefore
change
without
previous
notice.
Competent court
Since the contract of sale is confirmed by an Order Confirmation drawn up
in Rosà (Postal Code 36027 - ITALY), any such dispute shall be settled by
the laws of Italy and by the court of Vicenza (VI) ITALY.
34
COMUNELLO ®Copyright 2019 - All rights reserved
Tabla de contenido
