Comunello Automation QUAD - 230V - 2M Instrucciones De Uso Y De Instalacion página 28

Tabla de contenido
5 DESCRIPTION AND PROGRAMMABLE FUNCTIONS
The control panel has a MAIN MENU and two sub-menus called EXTENDED MENUS to customize the programming and the various system functions.
Pressing the SELECT button several times in succession you can scroll through the menu displayed by the 7 LEDs to choose the desired function
(flashing LED correspondingly flashing) and change its functionality with the SET button (the LED becomes fixed with function enabled or, conversely,
off with function disabled).
The first available menu is the MAIN menu summarized in Tab no. 2:
MAIN MENU
Press the SELECT button and select the desired function
from the main menu.
LIVEL 0 - MAIN MENU
LED
FUNCTION
DESCRIPTION
L1
DELAY
Door selection at start
L2
STEP BY STEP
Selection of opening logic
L3
TX CODE
Programmes remote controls
L4
CONDO
Enables the "Condominium"
function
L5
MOTOR TIME
Configures the movement and
deceleration time
L6
PAUSE TIME
Automatic closure setting
L7
PED TIME
Pedestrian stroke time
Table 2
The Second menu is the one defined as EXTENDED 1 and to access the programmable functions follow the instructions given in Tab. 3:
EXTENDED
• Press the SELECT button and scroll the LED menu until
MENU 1
you reach the LEV LED;
• Press SET once to access the EXTENDED MENU 1.
LIVEL 1 - EXTENDED MENU 1
LED
FUNCTION
DESCRIPTION
L1
PGM CODE
Remote control programming
L2
PHOTOCELL TEST
Carry out the Photocell test
before each movement
L3
STEP-BY-STEP 1
STEP-BY-STEP (P/P) Control
PROCEDURE
logic
L4
DOOR DELAY
Adjustment of the delay betwe-
en the two doors
L5
WATER HAMME-
Enabling of the opening push to
RING
unlock the solenoid interlock
L6
HAMMERING
Activation of thrust in closing to
CLOSING
unlock the solenoid interlock
L7
PRE-FLASHING/
Pre-flashing or courtesy light
COURTESY LIGHT
function
Table 3
28
COMUNELLO ®Copyright 2019 - All rights reserved
The LEV function LED stays on FIXED:
LED ON
Opens to left
Open-stop-close-stop (closes in pause in partial opening)
TX PP
TX P.PED
After the first, the other Commands are ignored during opening
and the pause time
Programmed work time
Manually programmed automatic closure
Programmed MOT 1 work time
The LED of the LEV function FLASHES with this frequency
LED ON
Enabled function
Enabled function
Open-stop-close-stop (IT DOES NOT CLOSE in pause in partial
opening)
4 s. fixed in OPEN, adjustable from 4 to a max. 15 s. in CLOSE
Water hammering function enabled
Closing function at full power for 1 sec.
3 sec. of pre-flashing before
Flashing active for 3 min. after
closure
opening command
LED OFF
DEFAULT
Motor no.2 delay
Automatic (open-close)
No remote control
Disabled function
30 seconds, without decelera-
tion (default)
Disabled function
10 seconds, without decelera-
tion (default)
LED OFF
DEFAULT
Disabled function
Disabled function
Open-stop-close-stop (closes
in pause in partial opening)
No delay
Disabled function
Disabled function
Disabled function
Tabla de contenido
loading

Este manual también es adecuado para:

Quad 230v 2m

Tabla de contenido