Tabla de contenido
Idiomas disponibles
Idiomas disponibles
CODE
6
08 REGULAR CYCLE PRICE (Factory Default)
6
08 When the d.xx is set to d.00, this 6 xx value
represents the number of coins (coin 1) needed to
start the washer; may adjust from 0–39. Change
this value by pressing the HOT button. 6 08 =
8 quarters = $2.00.
01
6
When the d.xx is set to d.CS, this 6 xx value
represents the number of push-in actuations of the
coin slide to start the washer. 6 01 would equal one
coin slide activation.
g
Press the WARM button once to advance to next code.
7
WASH LENGTH
11
7
11
This is the number of minutes for WASH. Washer
comes from the factory preset with 11 minutes. Choose
from 9–17 minutes by pressing the HOT button.
g
Press the WARM button once to advance to next code.
8
00 ADDITIONAL RINSE OPTION
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'.
8
00
Not Selected 'OFF'.
8
Ar
Selected 'ON'.
Press the COLD button once for this selection.
g
Press the WARM button once to advance to next code.
9 00 CYCLE COUNTER OPTION
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'.
9
00
Not Selected 'OFF'.
9
0C
Selected 'ON' and not able to be deselected.
Press the COLD button three consecutive times to select
'ON'. Once selected 'ON' it cannot be deselected.
g
Press the WARM button once to advance to next code.
1. 00 MONEY COUNTER OPTION
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'.
1.
00
Not Selected 'OFF'.
1.
0C
Selected 'ON'.
Press the COLD button three consecutive times
to select 'ON' and three consecutive times to
deselect (Not Selected 'OFF'.) Counter resets
by going from 'OFF' to 'ON'.
g
Press the WARM button to advance to next code.
1.
C0
Selected 'ON' and not able to be deselected.
To select 'ON' and not able to be deselected,
first select 'ON', then within 2 seconds, press
the COLD button twice, the HOT button once,
and exit the set-up mode.
g
Press the WARM button once to advance to next code.
2. 00 SPECIAL PRICING OPTION
This option is either SELECTED 'ON' or 'NOT'
SELECTED 'OFF'.
00
2.
Not Selected 'OFF', and next available code will be
A.00.
SP
2.
Selected 'ON'. Press the COLD button once for this
selection.
If SPECIAL PRICING OPTION is selected, you have
access to codes '3.XX' through '9.XX'.
g
Press the
button once to advance to next code.
WARM
EXPLANATION
CODE
OPTIONS TO USE IF SPECIAL PRICING IS SELECTED:
3.
08 SPECIAL CYCLE PRICE
3.
08
Represents the number of quarters (coin 1) to start a
cycle: may adjust from 0–39. (See VALUE OF COIN
1.) Advance from 0–39 by pressing the HOT button.
Factory default of 8 quarters = $2.00.
g
Press the WARM button once to advance to next code.
5.
00 TIME-OF-DAY CLOCK, MINUTES
00
5.
This is the TIME-OF-DAY CLOCK, minute setting;
select 0–59 minutes by pressing the HOT button.
g
Press the WARM button once to advance to next code.
6. 00 TIME-OF-DAY CLOCK, HOURS
NOTE: Uses military time or 24 hr. clock.
6.
00
This is the TIME-OF-DAY CLOCK, hour setting;
select 0–23 hours by pressing the HOT button.
g
Press the WARM button once to advance to next code.
7. 00 SPECIAL PRICE START HOUR
NOTE: Uses military time or 24 hr. clock.
7. 00
This is the start hour; 0–23 hours. Select START HOUR
by pressing the HOT button.
g
Press the WARM button once to advance to next code.
8. 00 SPECIAL PRICE STOP HOUR
NOTE: Uses military time or 24 hr. clock.
8. 00
This is the stop hour; 0–23 hours. Select STOP HOUR
by pressing the HOT button.
g
Press the WARM button once to advance to next code.
9. 10
SPECIAL PRICE DAY
9. 10
This represents the day of the week and whether
special pricing is selected for that day. A number
followed by '0' indicates no selection that particular
day (9.10). A number followed by an 'S' indicates
selected for that day (9.1S). To change the value
of '0' and 'S', use the COLD button.
Days of the week (1–7) are selected by pressing
the HOT button.
When exiting set-up code '9', the display must show
current day of week:
DISPLAY
DAY OF WEEK
10
Day 1 = Sunday
20
Day 2 = Monday
30
Day 3 = Tuesday
40
Day 4 = Wednesday
50
Day 5 = Thursday
60
Day 6 = Friday
70
Day 7 = Saturday
g
Press the WARM button once to advance to next code.
A. 00 VAULT VIEWING OPTION
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'.
00
A.
Not Selected 'OFF'.
A.
SC
Selected 'ON'. Press the COLD button once for
this selection. When selected, the money and/or
cycle counts will be viewable (if counter option[s]
is selected) when the coin box is removed.
g
Press the WARM button once to advance to next code.
EXPLANATION
CODE (selected)
1S
2S
3S
4S
5S
6S
7S
11
Tabla de contenido
