Chicco SYNTHESIS Instrucciones De Uso página 23

WARNING: It is dangerous to use the Reclined
Cradle on an elevated surface, such as tables,
chairs, etc..
WARNING: Always use the restraint system.
The Reclined Cradle does not replace a cot or
a bed. Should your child need to sleep, then it
should be placed in a suitable cot or bed.
Do not use the reclined cradle if any components
are broken or missing
Do not use accessories or replacement parts other
than those approved by the manufacturer.
Wash by hand in cold water; Do not bleach; Do
not tumble dry; Do not iron; Do not dry clean.
Age: From birth to approximately 6 months (up
to 9kg.)
Only place the reclined cradle on flat, stable
surfaces.
WARNING: Before carrying the rocking chair,
always place and lock the handle in the vertical
position "B".
HOW TO REMOVE THE FABRIC COVER
To clean the fabric cover of the child car seat,
unfasten the harness and remove the fabric cover.
During these operations, make sure that you re -
move the fabric cover from the adjustment but -
ton of the safety harness, as shown in diag. 20.
Please refer to the care label for instructions on
cleaning the fabric cover.
Clean the safety belts, buckle and plastic parts
with a soft, damp cloth. Do not use solvents or
bleaching agents: they may damage the compo -
nents or make them unsafe.
To fit / remove the sun canopy, it is necessary to
operate as shown in diag. 21.
HOW TO FIT THE CHILD CAR SEAT TO
THE STROLLER
The Synthesis child car seat can be fitted to
Chicco strollers equipped with the standard open/
close "CLIK CLAK" system.
Always check the type of hooks the stroller is
equipped with in the instructions booklet, and
whether they fit the child car seat.
15. Open the stroller following the instructions
provided in the stroller's booklet.
16. Place the Child Car Seat on a flat, stable sur -
face and turn the handle to the horizontal
position (C, see diag. 19).
17. Remove the two locking pins from the handle,
pulling and turning the two knobs that lock the
seat to the stroller (diag. 22).
18. Fit the Child Car Seat to the armrests of
the stroller (diag. 23), making sure that it is
locked on both sides (a click will be heard,
indicating that the child car seat is locked
correctly on both sides).
19. To release the Child Car Seat from the stroller,
simply press the two buttons located on the
handle (diag. 24).
20. Place the product on a flat, stable surface; then
turn the handle to the vertical position and rein -
sert the locking pins.
WARNING! The child car seat can be fitted to
the stroller also with the child sitting in the seat,
although the child's weight could make the opera -
tions more difficult.
Wash by hand in cold water
Do not bleach.
Do not tumble dry
Do not iron.
Do not dry clean.
FOR FURTHER INFORMATION,
PLEASE CONTACT:
Chicco UK Ltd
Prospect Close
Lowmoor Road Business Park
Kirkby in Ashfield
Nottinghamshire NG17 7LF
Customer Services Helpline
Tel: 01623 750870
(office hours only)
www.chicco.com
23