Check Blower Motor Orientation - GE CVM521P2MS1 Instrucciones De Instalación

A2.
USE TOP CABINET TEMPLATE
FOR PREPARATION OF TOP
CABINET
You need to drill holes for the top support screws, a
hole large enough for the power cord to fit through,
and a cutout large enough for the exhaust adaptor.
• Drill the holes, following the instructions on the
CAUTION
Wear safety goggles when
drilling holes in the cabinet bottom.
CHECK BLOWER MOTOR
A3.
ORIENTATION
facing the top of the microwave, skip to Step A5.
Otherwise, continue to Step A4 to adjust the motor
orientation.
A4. ADAPTING BLOWER FOR
OUTSIDE VENTILATION
1 Remove and save the screws that hold the blower
motor to the microwave oven.
Blower Motor
Screw
2
Remove and save the metal blower shield on the
Installation Instructions
Back of Oven
Blower Motor
Screws
A4. ADAPTING BLOWER FOR
OUTSIDE VENTILATION
(Cont.)
3
Attached the metal blower shield to the backside
4
the microwave oven.
5
blower unit.
BEFORE: Fan
Blade Openings
Facing Forward
6
openings are facing the top.
Roll
Blower
Shield
AFTER: Fan
Blade Openings
Facing Up
sure wires
remain routed
in the grooves
of the motor
frame.
13