Descaling
The hardness of the water will lead to a scaling up of the appliance over time.
Limescale impairs the functionality of the appliance, reduces the quality of the
tea and increases energy consumption.
NOTE
►
Ask your local water utility for information about the hardness of the water.
If your water is very hard, descaling is necessary sooner, with softer water
later. Use a descaler suitable for household device and follow the usage
instructions.
1) Use a standard commercial lemon-based descaler. Always follow the in-
structions on the packaging of the descaler.
2) Insert the brewing system into the jug
3) Add the descaler solution to the jug
MAX marking and never less than the MIN marking.
4) Wait 10 minutes and then switch the appliance on.
5) Allow the solution to boil and then wait until it has run through the brewing
system.
6) If necessary, repeat the process. You can re-user the descaler solution but
you will have to allow it to cool down first.
7) Once the limescale has been loosened, boil clear water and run it through
the system. Repeat around 2–3 times.
8) Afterwards, clean the jug
section "Cleaning and care".
Storage
■
If you are not going to use the appliance for an extended period, wind
the cable anticlockwise around the cable retainer on the underside of the
base
■
Store the appliance in a dust-free and dry location.
Disposal
Never dispose of the appliance in your normal domestic waste.
This product is subject to the provisions of European Directive
2012/19/EU-WEEE (Waste Electrical and Electronic Equipment).
Dispose of the appliance via an approved disposal company or your municipal
waste facility. Please observe the currently applicable regulations.
Please contact your waste disposal centre if you are in any doubt.
Dispose of all packaging materials in an environmentally friendly manner.
STK 650 A2
and the brewing system as described in the
and guide the end through the cable outlet on the base
.
. Never fill liquid to more than the
GB│IE
.
21
■
│