Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Safety instructions for air tools
z Operating hazards
When using the machine the
„
„
operator's hands may be ex-
posed to crushing, impact, cut,
abrasion and heat hazards.
Wear suitable gloves to protect
hands.
The operator and maintenance
„
„
personnel must be physically
capable to manage the weight
and power of the machine.
Hold the machine correct: be
„
„
prepared to counteract typical
or sudden movements – keep
both hands ready.
Be sure your body is well bal-
„
„
anced and maintain a solid
stance.
If tools are required to absorb
„
„
the reaction torque, use a sus-
pension attachment whenever
possible. If this is not possible,
we recommend side handles
for machines with straight han-
dle and pistol grip. At any rate
we recommend using tools to
absorb if it is greater than 4
Nm for machines with straight
handles, greater than 10 Nm
for machines with pistol grip
and greater than 60 Nm for
offset screwdrivers.
In the event of power failure
„
„
release the start- or stop con-
trol.
54
GB/MT
Only use the lubricants recom-
„
„
mended by the manufacturer.
Hex nut drivers with open flat-
„
„
head can crush fingers.
Do not use the tool in tight
„
„
spaces and be sure your
hands are not crushed be-
tween the machine and work
piece, especially when un-
screwing.
z Hazards due to repetitive
motions
When using a machine for
„
„
screw connections the oper-
ator may experience discom-
fort in hands, arms, shoulders,
neck or other body parts whilst
performing work-related tasks.
Maintain a comfortable posi-
„
„
tion whilst using this tool, be
mindful of a secure grip and
avoid awkward positions or
positions making it difficult to
maintain your balance. The
operator should change his
posture during extended pe-
riods of use, which may help
to prevent discomfort and fa-
tigue.
If the operator experiences
„
„
symptoms such as persistent
malaise, discomfort, palpita-
tions, pain, tingling, numb-
ness, a burning sensation or
stiffness, these warning signs
Capítulos
Tabla de contenido
Solución de problemas
