NOTE: Removing the doors is always recommended
when it is necessary to move the refrigerator through
a narrow opening. If it is necessary to remove the
handles, follow the directions below.
HOW TO REMOVE REFRIGERATOR
DOOR HANDLE
NOTE: Handle appearance may vary from the
illustrations on this page.
Removing Refrigerator Handle
Use the provided 2.5 mm hex key to loosen the
2 set screws located on the inside top ends of the
handle. Remove the handle from the underlying
handle mounting bolts on the door.
HOW TO REPLACE REFRIGERATOR
DOOR HANDLE
NOTE: Handle appearance may vary from the
illustrations on this page.
Replacing Refrigerator Handle
Place the handle ends onto the handle mounting
bolts on the door. Use the 2.5 mm hex key to
tighten the 2 set screws to secure the handle in
place.
FDR 30Cuft_UCG(영+스)(Kenmore).indd 12
REFRIGERATOR INSTALLATION
Mounting
Bolts
12
Set Screw
Hex Key
2019-10-14 오전 10:30:18