Front Brake Fluid Level - Husqvarna TE 250 2011 I.E. Instrucciones De Uso

ADJUSTMENT OF THE CONTROL LEVER AND CHECK OF THE

FRONT BRAKE FLUID LEVEL

The adjuster (2), located on the control lever, allows adjusting
of the free play (a).
Free play (a) must be at least 3 mm (0.1 in.).
The level of the fluid in pump reservoir must never be below
the minimum value (1), which can be checked from the window
on the rear side of the pump body.
A decrease of the fuel level will let air into the sustem, hence
an extension of the level stroke.
EN - 32
WARNING*: If the brake lever feels mushy
when it is applied, there may be air in
the brake lines or the brake may be
defective. Since it is dangerous to operate
the motorcycle under such conditions, have
the brake checked immediately by an
authorized HUSQVARNA dealer.
CAUTION*: Do not spill brake fluid on to any
painted surface or lenses.
CAUTION*:Do not mix two brands of fluid.
Change the brake fluid in the brake line if
you wish to switch to another fluid brand.
CAUTION*: Brake fluid may cause irritation.
Avoid contact with skin or eyes. In case of
contact, flush thoroughly with water and call
a doctor if your eyes were exposed.
1
A: to encrease clearance
B: to decrease clearance
2
+
A
-
B