Husqvarna TE 250 2011 I.E. Instrucciones De Uso página 71

THROTTLE CONTROL
The throttle knob (1), is located on the right hand side of the
handlebar. The position of the throttle control can be adjusted
by loosening the two fastenig screws .
CAUTION
Do not forget to tighten the screws (A) after
the adjustment.
FRONT BRAKE CONTROL
The brake control lever (2) is located on the right hand side of
the handlebar. The position of the throttle control can be adju-
sted by loosening the two fastenig screws .
CAUTION
Do not forget to tighten the screws (B) after
the adjustment.
CLUTCH CONTROL
The hydraulic clutch control lever is located on the left-hand side
of the handlebar and is protected against dirt with a rubber
guard.
The clutch control position on the handlebar can be adjusted by
loosening the lower fastening screws (A).
CAUTION
Do not forget to tighten the screws after the
adjustment.
A
TC
A
TE
STEERING LOCK (TE)
The motorcycle is equipped with a steering lock (1) on the R.H.
side of the steering head tube.
To lock it, procede as follows:
turn the handlebar leftwards, place the key in lock and turn
counterclockwise. Push the key inwards (if necessary, turn to
and from). Turn the key clockwise and remove it from the lock.
To unlock the steering lock, reverse the above procedure.
1
EN - 15