John Bean Balco 9460 Manual De Operador página 87

Symbols and meaning:
Readings and
operator prompts.
Switch over between
•
optimisation and
minimisation
Flashing: choose
M
optimisation
Return key:
Start of optimisation
program;
Input of valve
position.
Fine key:
In the optimisation
program
fine
change-over from
main program.
STOP key:
Interruption of opti-
misation program;
stop
Return to balancing
program.
Start measuring run
by closing the wheel
guard.
Start
Measuring run of rim
only.
Indispensable for
optimisation program.
Measuring run of tyre/
rim assembly.
Single mark.
To be provided onthe
right tyre side when
wheel is indexed ac-
cording to readings.
Double mark.
To be provided on the
right or left tyre side
(as indicated) when
wheel is indexed ac-
cording to readings.
Mount tyre on rim or
readjust on rim.
Adjust tyre mark to
coincide with rim valve
position.
Turn tyre over on rim.
Adjust tyre mark to
coincide with rim valve
position.
Balance wheel
according to readings.
OP.5 – H1: It is not
recommended, but
possible, to continue
optimisation.
H0: Optimisation
cannot be improved;
press STOP key;
balance wheel.
H2: Optimisation can-
not be improved;
minimisation is still
possible.
Error code E 8:
Valve position was not
entered.
Error code E 9:
An error was made in
optimization.
Press STOP key;
repeat optimization.
Sequence of operations and readings
•
M
Un.3
fine
UN program
of minimization
see overleaf
Start
Un.4
fine
Start
stop
Start
Optimisation program
Start
fine
stop
Start
stop
Start
stop
Un.7
fine
Un.7
stop