Qualified Personnel; Risks Incurred By Failure To Comply With The Safety Precautions; Safety Consciousness On The Job; Safety Precautions For The Operator - Wilo Stratos GIGA Serie Instrucciones De Instalación Y Funcionamiento

English
2.2

Qualified Personnel

2.3 Risks incurred by failure to comply
with the safety precautions
2.4

Safety consciousness on the job

2.5

Safety precautions for the operator

4
NOTE:
A notice with useful information for the user in relation to the prod-
uct. It attends the user to possible problems.
Information applied directly to the product, such as:
• direction of rotation arrow,
• identifiers for connections,
• name plate,
• and warning sticker,
must be strictly complied with and kept in legible condition.
The personnel installing the pump must have the appropriate qualifi-
cations for this work. Area of responsibility, terms of reference and
monitoring of the personnel are to be ensured by the operator. If the
personnel are not in possession of the necessary knowledge, they are
to be trained and instructed. This can be accomplished if necessary by
the manufacturer of the product at the request of the operator.
Non-observance of the safety instructions can result in risk of injury
to persons and damage to the environment and the product/unit.
Non-observance of the safety instructions results in the loss of any
claims to damages.
In detail, non-observance can, for example, result in the following
risks:
• danger to persons from electrical, mechanical and bacteriological
influences,
• damage to the environment due to leakage of hazardous materials,
• damage to property,
• failure of important product/unit functions, failure of required main-
tenance and repair procedures.
The safety instructions included in these installation and operating
instructions, the existing national regulations for accident prevention
together with any internal working, operating and safety regulations
of the operator are to be complied with.
• This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of expe-
rience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible
for their safety.
• If hot or cold components on the product/the unit lead to hazards,
local measures must be taken to guard them against touching.
• Leakage (e.i. from a shaft seal) of hazardous (e.i. explosive, toxic or
hot) fluids must be discharged so that no danger to persons or to the
environment arises.
• National statutory provisions are to be complied with.
• Highly flammable materials are always to be kept at a safe distance
from the product.
• Danger from electrical current must be eliminated. National Electrical
Codes, local codes and regulations must be followed.
WILO SE 01/2014