Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Schedule Settings for AUX SCHEDULE
e Aux Schedules are highly simpli ed programs that can be enabled to work in addition to Schedules A, B, and C. Aux Schedules are
assigned to a single valve or relay, have a single start time, and use the Weekday Schedule type.
Aux1 can operate a valve or relay which is hard wired to one of the valve terminals. Aux2 and Aux3 are wireless, and require the use of the
Smart Connect (A-EVO-SC) wireless module, and the Wireless Auxiliary Relay (A-EVO-AR).
Set Schedule Status – Select the schedule's mode. Place it in ENABLED (Active) or DISABLED (OFF).
Step 1
– Use the Up
or Down
– Use the Up
or Down
Step 2
SELECT
to save.
Set Active Day – Select the days that the Auxiliary Schedule can be activated.
Step 1
– Use the Up
or Down
Step 2
– Use the Left
or Right
Down
arrows to activate
Set Start – Set the start time that the Auxiliary Schedule is activated.
– Use the Up
or Down
Step 1
Step 2
– Press the Up
or Down
arrows to navigate between Hours and Minutes, then press SELECT
Set Runtime – Set the duration that the Auxiliary Schedule is activate.
– Use the Up
or Down
Step 1
Step 2
– Press the Up
or Down
Select Valve – (AUX1 Only) Assign a valve terminal to AUX1.
Step 1
– Use the Up
or Down
– Press the Up
or Down
Step 2
then press SELECT
Select Device – (AUX2 and AUX3 Only) Wireless Auxiliary function works in conjunction with Smart Connect Wireless module
(A-EVO-SC) and
EVOLUTION
In order to communicate with the wireless auxiliary relays, the
with Smart Connect module. To connect the Smart Connect module, simply plug the module to the backside of
® AG's timing mechanism. See Smart Connect's installation instructions.
the
EVOLUTION
To communicate with the wireless auxiliary relay, you must add the device to the controller's device list.
See ADD/REMOVE DEVICE/AUXILIARY section for details.
Once the wireless auxiliary relay has been added into the AUX2 or AUX3 schedule, the device's ID number will be displayed in the
ADVANCED/SCHEDULE DETAILS/AUX2 (OR AUX3).
Erase Auxiliary Schedule
– Use the Up
or Down
Step 1
Step 2
– Use the Up
or Down
arrows to navigate to STATUS, then press SELECT
arrows to ENABLE (turn on) or DISABLE (turn o ) the schedule. Press
arrows to navigate to ACTIVE DAYS, then press SELECT
arrows to navigate within the days of the week. Use the Up
or turn o
Auxiliary. Repeat for all days of the week. Press SELECT
arrows to navigate to START, then press SELECT
arrows to enter the desired start time. Use the Left
arrows to navigate to RUNTIME, then press SELECT
arrows to enter the desired runtime, then press SELECT
arrows to navigate to VALVE, then press SELECT
arrows to assign a valve terminal to the auxiliary schedule,
.
® Auxiliary Relay (A-EVO-AR).
EVOLUTION
arrows to navigate to ERASE SCHEDULE, then press SELECT
arrows to YES to proceed to erase the schedule or NO to cancel, then press SELECT
.
.
or
.
and Right
when nished.
.
.
.
® AG controller must be equipped
.
AUX 1
STATUS
ENABLED
ACTIVE DAYS
START
OFF
RUNTIME
OFF
VALVE
VALVE1
ERASE SCHEDULE
AUX 1
S
M
T
W
T
F
S
TODAY IS THURSDAY
when nished.
AUX 1
STATUS
ENABLED
ACTIVE DAYS
START
07:30AM
RUNTIME
OFF
VALVE
VALVE1
AUX 1
STATUS
ENABLED
ACTIVE DAYS
START
07:30AM
RUNTIME
04:30
VALVE
VALVE1
AUX 1
STATUS
ENABLED
ACTIVE DAYS
START
07:30AM
RUNTIME
04:30
VALVE
VALVE1
AUX 2
STATUS
ENABLED
ACTIVE DAYS
START
08:00AM
RUNTIME
02:00
ID
94 73 00
ERASE SCHEDULE
ARE YOU SURE?
YES
.
19
Capítulos
Tabla de contenido
