Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Using More Than One Active Schedule
®
e
EVOLUTION
AG
Controller has the ability to run up to three watering schedules. By default, only one schedule is active. Additional sched-
ules can be activated, see Advanced Functions section. Once activated, the additional schedules will appear under the
To edit a particular Schedule:
Step 1
– Press the
SCHEDULES button.
Step 2
– Use the Up
or Down
– Proceed with the Schedule Setup section.
Step 3
Water Now
Water Now is used to manually activate a schedule, valve(s), or to test all valves.
Note: At any point, you can return to the previous menu by pressing the Left
pressing the
HOME button.
Manually Activate a Schedule
Step 1
– Press the
WATER NOW button.
Step 2
– Use the Up
or Down
Press SELECT
. Watering will begin.
e selected schedule will run and activate all assigned valves.
(For controllers with multiple active schedules only.)
Use the Up
or Down
Step 3
– From the Home Screen, the schedule can be advanced by pressing the Right
e Example shows valve 1 of schedule A is active with 2 minutes of runtime remaining.
Manually Activate a Specific Valve(s)
Step 1
– Press the
WATER NOW button.
Step 2
– Use the Up
or Down
then press SELECT
Step 3
– To activate or deactivate the fertilizer pumps during valve operation, use the Up
PUMPS menu, then press SELECT
Note: When the WITH FERT PUMP selection is NO, the fertilizer program will not operate for the manual operation.
When the WITH FERT PUMPS selection is YES, then the fertilizer program for that valve will activate. To review the fertilizer
program for a valve, see ADVANCED menu selection for FERT PUMP DETAILS. If the fertilizer program calls for a longer
injection period than the manual watering time entered, the fertilizer program will stop for that valve at the end of the watering
time.
Step 4
– Use the Up
or Down
Press the Right
Step 5
– Use the Up
or Down
e valve will activate until the speci ed runtime expires. A water drop icon is displayed to indicate that the valve is actively
watering.
Step 6
– Repeat Steps 3 and 4 to activate additional valves. Watering will occur in the order that the valves are entered.
12
arrows to select the schedule you want to edit. Press SELECT
arrows to navigate to SCHEDULE.
arrows to select the Schedule you want to activate. Press SELECT
arrows to navigate to VALVES,
.
. Use the Up
arrows to select the speci c valve to activate.
arrow or SELECT
.
arrows to assign the valve a runtime. Press SELECT
button or return to the main screen by
WATER NOW
SCHEDULE A
SCHEDULE B
VALVES
ALL VALVE TEST 02:00
arrow.
WATER NOW
SCHEDULE A
SCHEDULE B
VALVES
ALL VALVE TEST 02:00
or Down
or Down
arrows to set YES or NO, then press SELECT
.
Schedules Menu.
.
HOME
06:02AM
MON
09/08
SCHEDULE A
01:VALVE1
00:02
.
WATER NOW
WITH FERT PUMPS
NO
VALVE1
00:15
VALVE2
OFF
VALVE3
FP1
VALVE4
FP2
arrows to select WITH FERT
.
WATER NOW
WITH FERT PUMPS
NO
VALVE1
00:15
VALVE2
OFF
VALVE3
FP1
VALVE4
FP2
Capítulos
Tabla de contenido
