Tabla de contenido
Maintenance
Cleaning the Brush
and Brush Tank
25005/97231 Rev D
The Marsh Touch Taper requires very little maintenance, but it is important to keep the
machine clean. General cleaning is suggested at least once a month, or more frequently
for heavy usage. This includes cleaning the brush and brush tank, the cutter, and the
gears behind the left cover plate.
1. Turn the machine off and unplug the power cord.
2. Remove the water bottle.
3. Remove the brush tank (with the hose and regulator attached) from the tape
machine by releasing the holding clip.
Caution! The water in the tank and the exposed brush tank post may be hot.
4. Pour the water out of the moistening system.
5. Remove the brush from the brush tank.
6. Clean the brush by soaking it in warm, soapy water for five minutes. Remove any
caked on glue by rubbing the bristles. Rinse the brush in clear water.
21
Tabla de contenido
