Electrical Connections - Nilfisk GD 930 Instrucciones De Manejo

GROUNDED MACHINES
IMPORTANT
240 volt 50 Hz. machines are fitted with a 13 amp. 3 pin
moulded plug. the plug is fitted with a 7 amp. detachable fuse.
The correct replacement for the fuse is identified by marking or
colour coding. Only fuses that are ASTA approved to BS 1362
should be fitted. Never use the plug without the fuse cover
fitted. Replacement fuse covers are available at any electrical
retail outlet. If the available socket outlet is not suitable for
the plug supplied, the plug must be cut off and an appropriate
plug fitted. The plug thus cut off MUST BE DESTROYED for
safety reasons before being disposed of. Machines built for
other voltages and frequencies are not normally supplied
with a fitted plug. If it is necessary to fit a plug, the wires in
this power supply cord are coloured in accordance with the
following code:
GREEN & YELLOW-EARTH
BLUE-NEUTRAL
BROWN-LIVE
To connect the new plug:
The wire which is coloured green & yellow must be connected to
the terminal in the plug which is marked with the letter 'E' or
by the safety earth symbol
or coloured green or
green & yellow. The wire which
is coloured blue must be connected to the terminal in the plug
which is marked with the letter 'N' or is coloured black or blue.
The wire which is coloured brown must be connected to the
terminal in the plug which is marked with the letter 'L' or is
coloured red or brown. If the plug to be fitted does not conform
to the above notation then consult a qualified electrician.
822 9393 000 Instruction for use GD 930 EU.indd 9

ELECTRICAL CONNECTIONS

(Only applicable to UK)
DOUBLE-INSULATED MACHINES
IMPORTANT
240 volt 50 Hz. machines are fitted with a 13 amp. 3 pin
moulded plug. the plug is fitted with a 13 amp. detachable
fuse. The correct replacement for the fuse is identified by
marking or colour coding.
Only fuses that are ASTA approved to BS 1362 should
be fitted. Never use the plug without the fuse cover fitted.
Replacement fuse covers are available at any electrical
retail outlet.
If the available socket outlet is not suitable for the plug
supplied, the plug must be cut off and an appropriate plug
fitted. The plug thus cut off MUST BE DESTROYED for
safety reasons before being disposed of.
Machines built for other voltages and frequencies are not
normally supplied with a fitted plug.
If it is necessary to fit a plug, the wires in this power supply
cord are coloured in accordance with the following code:
BLUE-NEUTRAL
BROWN-LIVE
To connect the new plug:
If using a three-pin plug, do not make any connection to
the the terminal in the plug which is marked with the letter
'E' or by the safety earth symbol or coloured green or green
& yellow. This machine is double-insulated and no earth
connection is necessary.
The wire which is coloured blue must be connected to the
terminal in the plug which is marked with the letter 'N' or
is coloured black or blue.
The wire which is coloured brown must be connected to
the terminal in the plug which is marked with the letter 'L'
or is coloured red or brown.
If the plug to be fitted does not conform to the above nota-
tion then consult a qualified electrician.
9
2008-06-26 13:06:13