Technical Specifications; Measuring Voltage - Metrix MTX3250 Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

Technical Specifications

Note

Measuring voltage

V
and V
AC
AC+DC
alternating
"TRMS"
voltage
Note
V
direct voltage
DC
48
Only assigned tolerance values or limits are guaranteed values. Non-
tolerance values are for information (NFC 42670 standard).
Please note: "n%L +nUR" means "n% of reading + n Representation Unit"
according to CEI 485).
Technical specifications are only guaranteed after a 30-minute warming up
period.
On this position, users can measure the rms value of AC voltage with its
direct component (no capacitive coupling) : "TRMS" measurement.
Input
Resolu-
Range
resistance
500 mV
10 MΩ
AC
10 MΩ / 1 GΩ (∗)
500mV
+
AC
DC
5 V
0,1 mV
11 MΩ
AC
1,0 mV
50 V
10 MΩ
AC
500 V
10 MΩ
AC
600 V
10 MΩ
AC
(
) Choose from menu.
Results < 0.2 % are not displayed.
Admissible permanent maximum voltage: 600 V
Specifications valid from 10 % to 100 % of F rate < 20 kHz
Specifications valid from 20 % to 100 % of F rate > 20 kHz
Influence of peak factor on V precision:
• 0.5 % for peak factor between 2 and 3
• 1 % for peak factor between 3 and 6
Rejection: Common mode > 60 dB to 50 Hz or 60 Hz according to selection
Automatic or manual rate selection.
On this position, users can measure a direct voltage value or the direct
component of alternating voltage (you must keep to the range
corresponding to the rms value, see Serial mode).
Range
Accuracy
500 mV
0.08% + 3D
5 V
0.08% + 3D
50 V
0.08% + 3D
500 V
0.1% + 3D
600 V
0.1% + 3D
(
) Choose from menu
Admissible permanent maximum voltage: 600 V
Rejections:
Common mode > 120 dB to 50 Hz and 60 Hz according to
Serial mode
Automatic or manual range selection.
Admissible
tion
overload
40 Hz to
1 kHz
0,5 %
10 µV
+ 40 D
(1 min max)
1000 V
DC
or
0,5 %
700 V
AC
+ 30 D
10 mV
0,1 V
Resolution
0.01 mV
0.1 mV
1.0 mV
10 mV
0.1 V
selection
> 60 dB to 50 Hz and 60 Hz with active filter
Technical Specifications
Accuracy
1 kHz to
4 kHz to
20 kHz to
4 kHz
20 kHz
50 kHz
-
-
-
3 %
1 %
2 %
+ 30 D
+ 30 D
+ 30 D
-
rms
AC
Input resistance
10 MΩ / (∗)1 GΩ
11 MΩ
10 MΩ
10 MΩ
(1 min max.)
10 MΩ
rms
DC
50,000-count Benchtop Multimeter
50 kHz to
75kHz to
75 kHz
100 kHz
-
-
5 %
7 %
+ 30 D
+ 30 D
-
-
Admissible
overload
1000 V
DC
or
700 V
AC
Tabla de contenido
loading

Tabla de contenido