Operation; Fueling - Efco DS 2400D-PU Manual De Instrucciones

Fueling

en
Do Not Smoke!
This product is powered by a 2-cycle engine
and requires pre-mixing gasoline and 2-cycle
oil. Pre-mix unleaded gasoline and 2-cycle
engine oil in a clean container approved for
gasoline.
RECOMMENDED FUEL: THIS ENGINE IS
CERTIFIED TO OPERATE ON UNLEADED
GASOLINE INTENDED FOR AUTOMOTIVE
USE WITH AN OCTANE RATING OF 89 ([R +
M] / 2) OR HIGHER.
Mix 2-Cycle
according to the instructions on the package.
We strongly recommend the use of 2%
(50:1) Efco Two Cycle Engine Oil, which is
specifically formulated for all Efco air-cooled
two-stroke engines.
The correct oil / fuel proportions shown in the
table below are suitable when using the Efco
Two Cycle Engine Oil or an equivalent high-
quality engine oil (JASO specification FD or
ISO specification L-EGD).
When oil specifications are NOT equivalent or
unknown use 4% (25:1) fuel / oil mixing ratio.
CAUTION:
AUTOMOTIVE OIL OR
2-CYCLE OUTBOARD OIL.
CAUTION:
- Match your fuel purchases to
your consumption; don't buy
more than you will use in one
or two months;
- Store gasoline in a tightly-
closed validate container in a
cool, dry place.
12
Engine Oil with
DO NOT

OPERATION

CAUTION
never use a fuel with an ethanol
percentage
gasohol (mixture of gasoline and
ethanol) up to 10% ethanol or E10
fuel are acceptable.
When using an oxygenated gasoline a good
practice of fuel management is necessary.
Gasoline oxygenated with alcohol readily
takes up water when it is present; the water
may be condensed out of humid air or be a
contaminant in the fuel system, including tank.
The use of oxygenated gasoline may cause
gasoline
the occurrence of vapor-lock easier.
NOTE - Prepare only the quantity of mixture
required for immediate use; do not leave
fuel in the tank or a container for a long
time. Were commend the use of the additive
Emak ADDITIX 2000 code 001000972 if the
mixture is to be stored for 30 days.
Alkylate gasoline
USE
CAUTIONS – Alkylate fuels have
different density than normal fuel.
Therefore engines, set with normal
fuel, need different H jet regulation
to avoid critical issues. For this
operation it's necessary turned at
a Licensed Service Dealer.
- For the mixture,
higher than 10%;