Tabla de contenido
Idiomas disponibles
Idiomas disponibles
English
Thank you for placing your trust in our company by purcha-
sing the Weller electric screwdriver. Production was based on
stringent quality requirements which guarantee the perfect
operation of the device.
1.Caution!
Please read carefully these Operating Instructions and the
attached safety information prior to initial operation. Failure
to observe the safety regulations results in a risk of life and
limb.
The manufacturer shall not be liable for damage resulting
from misuse of the machine or unauthorised alterations.
The electric screwdriver corresponds to the EC Declaration of
Conformity in accordance with the basic safety requirements
of Directives 2006/42/CE, 2006/95/CE and 2004/108/CE.
WARNING:
When using electric screwdrivers, basic safety precaution
should always be followed to reduce the risk of fire, electric
shock and personal injury. Read all the instructions below
before using the screwdriver and save them.
1.
Keep the work area clean and well lit.
2.
Do not use the electric screwdrivers in damp or wet
locations or in presence of flammable liquid or gases.
3.
Avoid body contact with grounded surfaces such as
pipes, radiators, refrigerators, etc.
4.
Keep children and visitors away from work area.
5.
When not in use screwdrivers should be stored in dry
and locked-up place and out of the reach of children.
6.
Do not use the screwdrivers for purposes or work not
intended.
7.
Dress properly. Do not wear loose clothing and jewelry.
Wear protective hair covering to contain long hair.
8.
Never carry the screwdriver by its cable or pull it to
disconnect it from socket.
Technical Data
Lever start Electric Screwdriver
Order-No.
Model
T0053909199
WBTS12L
T0053909399
WBTS35L
T0053909599
WBTS35ECL
Push to start Electric Screwdriver
Order-No.
Model
T0053909299
WBTS12P
T0053909499
WBTS35P
4
RPM
Torque
max.
Nm
650
0,05 - 1,2
800
0,5 - 3,5
800
0,5 - 3,5
RPM
Torque
max.
Nm
650
0,05 - 1,2
800
0,5 - 3,5
9.
Use clamps or a vice to hold work.
10. Keep proper footing and balance at all times.
11. Inspect tool cable periodically and, if damaged, have it
repaired or replaced by authorized service facility.
Always keep handles dry, clean and free from oil and
grease.
12. Disconnect tools from power supply before any
operation of servicing, when changing accessories and
when you do not use them.
13. When screwdriver is used outdoors, only operate with
extension cords intended for use outdoors and so
marked .
14. Pay attention while working. Do not operate screwdriver
when you are tired.
15. Always check the screwdriver is not damaged before
using it. Detective switches must be replaced by
authorized service center. Never use tools that cannot
be turned on or off by the switch.
16. The use of any other accessory other than
recommended in this operating instruction may
represent a risk of personal injury.
17. Have the screwdriver repaired only by authorized and
expert people. Failing to do so may represent a serious
danger.
18. Do not touch conducting parts.
WARNING:
Before connecting the control unit and power supply to the
socket, please check the voltage you are using is that
indicated on the label of the unit itself.
Torque
Weight
Adjustment
kg
manuel
0,35
manuel
0,55
via power unit
0,55
Torque
Weight
Adjustment
kg
manuel
0,35
manuel
0,55
L x Ø
mm
205 x 33
230 x 40
230 x 40
L x Ø
mm
205 x 33
230 x 40
Tabla de contenido
