Rothenberger 53200 Instrucciones De Uso página 12

Mechanical squeezing device DA 32-63 no. 53200
Upper spindle sleeve
A freely rotating spacer SDR
11 with a screw axis
Overview
• Manually operated, mechanical spindle propulsion of the upper squeezing pipe
• 1 set of spacers: SDR 11
• Dimension of the spacers pipes of the diameter: 32/40/50/63
• Lower squeezing pipe with securing straps providing security against unintentional falling out
• Weight: about 5 kg
• Dimension about: l: 330 mm / b: 340 mm / t: 60 mm
Operation:
Î Using the spindle, screw the upper squeezing pipe as far as necessary upwards.
Î Adjust the spacers according to the pipe data. The spacers can be turned freely on the screw axes.
Î There is a sprung ball locking device on both sides of the upper squeezing pipe. There is an indenta-
tion on the rear of the spacers behind every diameter specification. If the spacers are turned the ball
locking device engages for every diameter specification and prevents unwanted turning of the spacers
during the squeezing process..
Î If the ball locking device does not function anymore due to dirt/damage you must monitor correct
seating of the spacers for the squeezing process and correct it if necessary.
Be careful with your fingers; there is a risk of injury occurring for an incorrect intervention.
Î Pull the lower squeezing pipe out of the frame, then place the squeezing device over the pipe to be
squeezed and then push the lower squeezing pipe back into the frame.
Î Ensure that the pipe lies in the middle on the lower squeezing pipe.
Î Using the spindle, now screw the upper squeezing pipe downwards until both spacers lie on the lower
squeezing pipe and can no longer be moved.
Î At the end of the squeezing process screw the upper squeezing pipe upwards again using the spindle.
Î Pull the lower squeezing pipe out of the frame, lift the squeezing device off the pipe to be squeezed
and then push the lower squeezing pipe back into the frame.
Secure the lower squeezing pipe against getting lost /falling out by screwing the upper squeezing
pipe downwards until it again lies firmly with the spacer on the lower squeezing pipe.
12
Frame
ENGLISH
Turning handle with spindle
Upper squeezing pipe with
ball locking device
Lower squeezing pipe
with securing straps