SECURING THE ROUTER TABLE
DO NOT use the router
WARNING
table unless it is firmly
mounted to a stable work surface.
Failure to securely mount the router
table could lead to serious personal
injury and/or property damage.
Secure router table to the work surface
using wood screws or sheet metal
screws and washers (not provided)
through the holes provided. There are a
total of 8 mounting holes. See Figure
12.
SWITCH BOX
Introduction
A conveniently located Switch Box
allows the operator to:
• turn the router ON and OFF from the
front of the table
• simultaneously operate other devices
such as a light or a vacuum
It also features a resettable, internal
circuit breaker that protects your
equipment against overloads. See
Figure 13.
O U
T L
E T
S
P U L
L O
N
P U S
H O
F F
R E S
E T
reset button
Figure 13
Electrical Hookup
Proper grounding diverts potentially
dangerous electricity away from the
operator. The switch box is intended for
use with a three-prong, grounded outlet.
(See Figure 14.) The switch box's
electrical cord features an equipment-
grounding connector and a grounding
plug. Insert the plug into an
accommodating outlet that conforms to
all local electrical codes and the
National Electric Code (NEC).
14
Figure 12
Figure 14
Capítulos
