Data Logger Configuration - Promax 8 plus Manual Del Usuario Y Operador

4.2.6.1

Data LOGGER configuration.

From the LOGGER mode, when
pressing the CONFIG key [14] we will
accede to the configuration menu. This
menu permits
THRESHOLD and MEASURES parameters. To
accede to them turn the rotary selector and once
the parameter we want to change is appears
shadowed, press it; then turning it its value will be
modified. Finally press it again to validate the new
value.
a) THRESHOLD: It activates / deactivates the measurement threshold.
This parameter allows to carry out the logger function in an agile way, by
activating only those measures we consider significative.
In the OFF mode (deactivated) all measurements are taken (with a level
higher than 20 dBµV). On the other hand, when a level is defined, only
those channels with a level higher than the THRESHOLD value will be
measured.
Page 36
PROMAX-8+
LOGGER NUMBER
DATE: 09:59
CHANNEL PLAN:
AUDIO:
UNITS:
THRESHOLD:
NOISE FREQ.:
CHAN FREQ
C23 487.25
C25 503.25
C27 519.25
C29 535.25
C31 551.25
C34 575.25
C37 599.25
C38 607.25
C39 615.25
C41 631.25
C43 647.25D
Figure 39.- Example of print.
to modify the
INSTRUCTION MANUEL. PROMAX-8+
10
10-10-1999
CCIR
5.50 MHz (FM)
dBuV
OFF
BW/2
V V/A C/N
76 14 52
53 9 33
81 16 55
59 13 39
78 16 44
67 11 45
54 7 34
57 14 >37
62 18 >42
71 14 43
43 13
Figure 40.- Logger configuration
menu.
May 2001