Installation And Start-Up - Promax 8 plus Manual Del Usuario Y Operador

INSTRUCTION MANUEL. PROMAX-8+
Removing the battery.
The battery is accessible from the back of the instrument. To disconnect the battery,
press the tab found at one end of it (1) and move the battery to separate it from the
body of the instrument (2). The battery will be released from its holder. Then slide the
battery out, as shown in figure 3.
3.3

Installation and start-up.

The PROMAX-8+ has been designed for use as portable equipment.
A fully charged battery can power the equipment for more than two hours.
When the low battery indicator appears on the display (
recharged.
When a fully discharged battery is installed, it is possible that, due to residual
charges, the PROMAX-8+ may start up. In this case, the instrument will automatically
disconnect before the low battery indicator appears on the display.
May 2001
Figure 2.- Installing the battery.
Figure 3.- Removing the battery.
),the battery must be
Page 11