Instrument Configuration - Promax SATHUNTER+ Manual De Instrucciones

As time goes by, the DVB-S, DVB-S2 and DSS demodulator circuit tends to
measure better, due to it includes an input signal tracking and an adaptation algorithm.
Therefore, to ensure a good quality at reading signal, you should wait for some additional
measurements.
If moving the antenna the MER value exceeds the quality reference (configurable
by software), the instrument will emit a high-pitched audible signal and the word MER
will become bold (MER). If the MER value is below the quality reference then the
instrument will emit a low-pitched audible signal and the word "MER" will not change.
Note: For the final step of precise adjustment and the optimisation of the signal
quality, it is important to select the most critical test point. This will
guarantee the quality for the other points with better conditions.
To switch off the instrument, press any of the instrument keys
for more than two seconds.

4.4 Instrument Configuration

The various parameters and information stored in the SATHUNTER+ can be
modified using
SATHUNTER+". This program is supplied with the instrument.
The program allows you to define the number of test points, the different
parameters for each point and the user and company's name.
Once the instrument has been configured, it has to be rebooted in order to apply
the changes.
All the necessary information for configuring the instrument and for using the
"CONFIGURATION SOFTWARE FOR SATHUNTER+" program can be found in the
manual accompanying the program.
NOTE:
To update the software version and user's manual access the PROMAX web page:
www.promaxelectronics.com
Page 22
the PC program
CONTROL PROGRAM (PC)
USER'S MANUAL. SATHUNTER+.
"CONFIGURATION
[2] or [3]
SOFTWARE FOR
10/2010