Mount Router (with Square
Adaptor Base Plate) to Table
BA, black (4)
Only assemble the router
CAUTION
to the table after you
have attached it to the square adaptor
base plate. Do not attempt to attach
the square adapter plate and then the
router to the table.
1. With router attached, place the
square adaptor base plate
underneath the router table inside the
area provided and against the metal
bosses.
AL
2. If your router has a on/off switch,
make sure it faces toward the front of
the table for easy access, if needed.
3. Align the holes in the welded nuts on
the adaptor base plate to the holes in
the bosses.
4. Insert 4 flathead sink screws (BA)
through the holes and tighten them
securely. See Figure 23.
SECURING THE
ROUTER TABLE
(Model 6156 Only)
mounted to a stable work surface.
Failure to securely mount the router
table could lead to serious personal
injury and/or property damage.
Secure router table to the work surface
using wood screws or sheet metal
screws and washers (not provided)
through the holes provided. There are 8
mounting holes. See Figure 24.
Figure 23
26
DO NOT use the router
WARNING
table unless it is firmly
Figure 24
Capítulos
