CONTINUED
WARNING
SECURE ROUTER TABLE
DO NOT attempt to use your router table unless
it is fastened firmly to your workbench or rests
stably on the floor.
KEEP HANDS AWAY FROM CUTTING AREA
CAUTION
STORE PROPERLY
Do not store router table outdoors or in a
damp location.
KEEP WORK AREA CLEAN
ALWAYS keep your work area clean,
uncluttered, and well lit. DO NOT work on or
place router table legs on floor surfaces that
are slippery from sawdust, oil, water, or wax.
DO NOT FORCE THE TOOL
Do not force tool or attachment to do a job for
which it was not designed. It will do the job
better and more safely at the rate for which it
was designed.
USE CLAMPS TO HOLD WORK WHEN
PRACTICAL
Using clamps to hold work is safer than using
your hand. It also frees both hands to
operate the tool.
DO NOT OVERREACH
Keep proper footing and balance at all times.
UNPACKING AND CHECKING CONTENTS
IMPORTANT
: Separate all parts from
packaging materials and check each item
against the package contents listed in this
manual, found on page 6.
INTRODUCTION
The wolfcraft® Router Table is designed to
provide an economical means to extend the
capabilities of your router.
We are certain you will find the wolfcraft®
Router Table a valuable addition to your shop.
DISCONNECT TOOLS BEFORE SERVICING
When changing bits, make sure router is
unplugged.
KEEP GUARDS IN PLACE
Be sure guards are in working order, properly
adjusted, and aligned.
MAINTAIN TOOLS WITH CARE
Keep tools sharp and clean for best and
safest performance. Follow instructions for
lubricating and changing accessories.
USE RECOMMENDED ACCESSORIES
Consult this manual for recommended
accessories. Follow the instructions that
accompany the accessories. The use of
improper accessories may cause hazards.
REMOVE ADJUSTING KEYS AND
WRENCHES
Form the habit of checking to see that keys
and adjusting wrenches are removed from
the tool before turning it on.
ENSURE SAFETY OF OTHERS
Keep visitors and children a safe distance
away from the work area, especially when
operating a power tool. Visitors should wear
the same safety equipment as the operator.
SAVE THESE INSTRUCTIONS
Your wolfcraft® Router Table is shipped
complete in one carton. Make sure all items
are accounted for before discarding any of the
packaging materials.
NOTE: This manual covers assembly
instructions, setup, operation, and parts lists
for both the Model 6155 Router Table and the
Model 6156 Router Table.
4
Capítulos
