Maintenance
and cleaning
• Never move the appliance whilst it is
switched on or is still hot. Switch off
the appliance, and wait until it has
cooled down before moving it.
• Never immerse the thermostat in
water, or in other liquids. If this
happens do not use the appliance
again; for safety reasons, dispose of
the appliance.
• Never use corrosive or scouring
cleaning agents.
After Use
(see Fig. 2)
1 Always remove the plug from the wall
socket and allow the appliance to cool
down completely before you clean it.
2 Remove any residues with kitchen
paper towel.
3 Clean the thermostat with a damp cloth.
4 You can clean the appliance in a
dishwasher or hot washing-up water.
Note: never immerse the power cord's
thermostat plug in water; always clean
it with a damp cloth!
5 Dry the appliance thoroughly after
cleaning.
Make sure that the appliance's
thermostat socket is completely dry
before you use it again!
6 Store the appliance and power cord in
the box. Save these user's
instructions.
7 Store this Table Chef in a dry place, out
of the reach of children.
6
Table Chef Article 102200/102210/102211
Never pour cold water onto the grill
plate; this will damage the grill plate,
and the water will boil and splash.
Safety
General information
• Please read these instructions
carefully, and retain them for future
reference.
• Use this appliance only as described
in these instructions.
• Use this appliance only for domestic
purposes.
• The use of this appliance by children
or persons with a physical, sensorial,
mental or motorial disability or with a
lack of the necessary knowledge and
experience can give cause to hazards.
Persons responsible for their safety
should give explicit instructions or
supervise the use of the appliance.
• Make sure that children do not play
with the appliance.
• Have any repairs carried out solely by
a qualified electrician. Never try to
repair the appliance yourself.
Always use the power cord and
thermostat supplied with this appliance.
Never use a power cord and thermostat
from another appliance.
Heat and electricity
• Verify that the mains voltage is the
same as that indicated on the type
plate on the appliance before use.
• Plug the appliance into an earthed
wall socket.
• Always remove the plug from the wall
socket when the appliance is not in
use.