•
Place an empty drip tray (7) under the
drainage point (6) of the baking plate (5)
(fig. C1).
•
Bake the sandwich until it has a golden
brown colour. The required baking time
depends on your wishes. Stay close to the
appliance in order to check from time to
time whether the sandwich is ready and to
make sure that the sandwich does not burn.
•
Open the appliance when the sandwich is
ready.
•
Remove the sandwich from the baking plate
(5) using a flat wooden or plastic spatula.
•
Close the appliance to retain the heat for
further use.
•
After use, remove the mains plug from the
wall socket and wait until the appliance
has cooled down.
Grilling food (fig. A - C)
Before you proceed, we would like you to
focus your attention on the following notes:
Do not let metal cutlery touch the baking
plates to prevent damage to the nonstick
coating.
•
Prepare the food.
•
Place the appliance on a stable and flat
surface.
•
Make sure that the baking plates (5) are
properly mounted. If necessary, clean the
baking plates (5) with a damp cloth.
•
Close the appliance (fig. C3).
•
Insert the mains plug into the wall socket.
•
Turn the thermostat dial (1) to set the
temperature. The temperature indicator
(2) comes on. The appliance starts heating.
•
Wait until the baking plates (5) have
reached the required temperature.
The temperature indicator (2) goes off.
The appliance is ready for use.
•
Take one of the following actions:
Open the appliance for use in the 90°
mode (fig. C1). Place the food onto the
lower baking plate (5). Place an empty
drip tray (7) under the drainage point
(6) of the baking plate (5) (fig. C1).
Open the appliance for use in the 180°
mode (fig. C2). Place the food onto both
baking plates (5). Place an empty drip
tray (7) under the drainage point (6) of
each baking plate (5) (fig. C2).
Note: If you want to grill food when the
appliance is closed, place the food onto the
lower baking plate before closing the appliance.
•
Small pieces will grill or fry better and more
quickly than large pieces.
•
Experiment with the required cooking time
and the required temperature to achieve
the best results.
•
Turn meat and fish using a flat wooden or
plastic spatula only once in order to
prevent them from drying out.
•
Remove the food from the baking plate
using a flat wooden or plastic spatula.
•
After use, remove the mains plug from the
wall socket and wait until the appliance
has cooled down.
Cleaning and maintenance
The appliance must be cleaned after each use.
Before you proceed, we need you to pay
attention to the following notes:
Before cleaning or maintenance, always
switch off the appliance, remove the mains
plug from the wall socket and wait until
the appliance has cooled down.
Do not immerse the appliance in water or
other liquids.
Before you proceed, we would like you to
focus your attention on the following notes:
Before cleaning or maintenance, remove
the baking plates.
Do not use aggressive or abrasive cleaning
agents to clean the appliance.
Do not use sharp objects to clean the
appliance.
•
Regularly check the appliance for possible
damage.
•
Clean the outside of the appliance with a
damp cloth.
•
Clean the baking plates after each use:
Remove the baking plates.
Remove any residues with a paper towel.
13