QSC PLD Serie Manual De Instrucciones página 16

Configuration
4 CH (A B C D)
3 CH (AB C D)
3 CH (A+B C D)
2 CH (AB CD)
2 CH (AB C+D)
2 CH (A+B C+D)
2 CH Alt (ABC D)
1 CH (ABCD)
1 CH (AB+CD)
Preset izard
EN
NOTE!: The power levels shown in this procedure are taken from the PLD4.3 unless indicated otherwise. PLD4.2 will show less power
and PLD4.5 will show greater power.
HOME > PRESETS > PRESET WIZARD > ENTER
Step 1 — Adjust Impedance and Power
OUTPUTS
Output:
Imped:
Power:
Remaining Power Available: 1875 W
Enter Load Profile (Impedance and Power)
Possible Output Mode Combinations using the Preset Wizard
*
25%
* Precentages are used to represent the power for different amplifier models.
TD-000368-00-A
8Ω Load
A B
1150 1150 1150
1200 1150
2250 1150
1200
1200
2250
1150
1150
4200
SPEAKERS SAVE
A B C
8.0 - - - -
625 - - - -
A B C D AB C
- - - - - - - - - - - - - - - - - -
25% 25% 25% 50% 25%
Modes: A B = Separate Channels / A+B = Bridge Mode / AB = Parallel Mode
PLD 4.5 — Total Power!: 5000
4Ω Load
C D A B C
1150 1250 1250 1250
1150 2250 1250
1150 1150 1250
1200 2250
2250 2250
2250 1150
1150 2400
2300
4250
— Table 3 —
Adjust Impedance based on
the total loudspeaker load
D
connected to the channel.
Default = 8
- -
Default = min. for amp
- -
Impedance and Power
are dynamically linked
for adjustments.
D AB CD A+B C
- - - - - - - - - - - - - - -
50%
25% 50% 50% 25%
— Figure 25 —
16
2Ω Load
D A B C
1250 625 625 625
1250 2100 625
1250 625 625
2250 2100 2100
1150 2100 625
1150 625 625
1250 4100
4200
2250
Scroll to select (Imped or Power)
Turn to adjust parameter
To confirm, press
Repeat for remaining
output channels
D A+B C+D ABC D
- - - - - - - - - - - - - - -
50% 25%
25% 50% 75%
D
625
625
625
625
To edit, press
ENTER
ENTER
AB + CD ABCD
- - - - - -
100% 100%