Guarantee; Notes On This Document - Eaton xChargeIn Manual De Instalación

Ocultar thumbs Ver también para xChargeIn:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 249
Introduction
1.5

Guarantee

Only the maintenance work expressly permitted by Eaton may be performed.
Any other manipulations to the device will also result in loss of warranty.
WARNING!
Danger due to electric shock and fire hazard!
After opening the front part, product safety can no longer be guaranteed.
Only the covers described in the instructions may be opened. If one of the
covers is sealed by a lead seal, it is not permitted to be opened by unautho-
rized persons. If the lead seal is broken, the device loses its specific suitabil-
ity and may no longer be put into operation due to the resulting incorrect
marking.
Fig. 1-1: Screws on front part
The front part
will break the warranty seal and void the warranty. For a warranty claim,
there is a duty of proof of the customer that the defect – which led to the de-
fect of the device – already existed at the time of delivery. If the warranty
seal is broken, this proof can no longer be provided, whereby the warranty
claim expires.
A device with broken warranty seals or removed lead seals may no longer
be put into operation. The necessary steps for replacement of the charging
station by the specialist dealer or service partner must be initiated.
1.6

Notes on this document

The manual is part of the product. It is to be retained over the entire life cycle
of the product and should be forwarded to any subsequent owners or users
of the product.
10
1
may not be opened. Opening the front part (4 Torx screws)
xChargeIn
Installation manual V1.01
© EATON
Tabla de contenido

Solución de problemas

loading

Tabla de contenido